PC715V0NSZXF

Output Type:	Darlington
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.300", 7.62mm), 5 Leads
Mounting Type:	Through Hole
Operating Temperature:	-25°C ~ 100°C
Vce Saturation (Max):	1V
Current - DC Forward (If) (Max):	50mA
Voltage - Forward (Vf) (Typ):	1.2V
Current - Output / Channel:	80mA
Voltage - Output (Max):	35V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	60µs, 53µs
Turn On / Turn Off Time (Typ):	--
Current Transfer Ratio (Max):	7500% @ 1mA
Current Transfer Ratio (Min):	600% @ 1mA
Voltage - Isolation:	5000Vrms
Number of Channels:	1
Part Status:	Discontinued at Digi-Key
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output

The PC715V0NSZXF is an optoisolator of the transistor, photovoltaic output type. As a device for isolating circuits electrically, the PC715V0NSZXF requires an electrical or optical input to be energized. It then produces a voltage output and current flow through the phototransistor, optically coupled to the diode. This device provides an excellent isolation of 2500V peak across the photodiode and phototransistor gap.

Application Field

The PC715V0NSZXF optoisolator is suitable for use in a range of applications requiring high-speed photovoltaic coupling. Its main purpose is to isolate the input and output circuits and prevent any voltage-level spikes and noise spikes from interfering with the operation of the system. The device is useful for applications such as relay and contactor control, sounding and signaling, fire alarm systems, motor control, consumer electronics, and industrial machinery.

Working Principle

The PC715V0NSZXF works by using an LED as a light source and photodetector. When the LED is energized, it emits light that’s detected by a photodiode. This photodiode then supplies current to a phototransistor which acts as an audio device and enables signal transmission through it. This means that when an electrical signal is sent to the photodiode, the phototransistor amplifies this signal.As the PC715V0NSZXF is an optoisolator, the input is isolated from the output, meaning that any errors or problems that might occur are confined to a single section of the circuitry and don’t affect the overall system. This ensures reliable and consistent operation of the device.By including the PC715V0NSZXF in a system, it is possible to isolate hazardous voltage, signals or networks from control systems or to protect against electrical surges and high voltage spikes. It also avoids the use of costly shielding, which can be complex and difficult to install.The PC715V0NSZXF also has a wide range of temperature characteristics, with an operating temperature from -55°C to 105°C, and a storage temperature of -55°C to 110°C. This device also has a low current consumption, operating between 1uA and 10mA, and a well-defined switching time of 1ms.In conclusion, the PC715V0NSZXF is an optoisolator with a transistor, photovoltaic output that is suitable for a variety of applications. It works by using an LED as its light source and a photodetector that is capable of detecting the light emitted by the LED. This enables signal transmission through the device while maintaining electrical isolation between the input and output. By using this optoisolator, isolation between hazardous voltage and signals is possible, eliminating the need for expensive shielding. The device also has a wide range of temperature characteristics and a low current consumption, making it a highly reliable and efficient optoisolator.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description