Allicdata Part #: | PC912L0NSZ0F-ND |
Manufacturer Part#: |
PC912L0NSZ0F |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Sharp Microelectronics |
Short Description: | OPTOISO 5KV PUSH PULL 8DIP |
More Detail: | Logic Output Optoisolator 25Mbps Push-Pull, Totem ... |
DataSheet: | PC912L0NSZ0F Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Data Rate: | 25Mbps |
Supplier Device Package: | 8-DIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 85°C |
Voltage - Supply: | 4.5 V ~ 5.5 V |
Current - DC Forward (If) (Max): | -- |
Voltage - Forward (Vf) (Typ): | -- |
Rise / Fall Time (Typ): | 4ns, 3ns |
Propagation Delay tpLH / tpHL (Max): | 40ns, 40ns |
Series: | OPIC™ |
Current - Output / Channel: | 10mA |
Output Type: | Push-Pull, Totem Pole |
Input Type: | Logic |
Common Mode Transient Immunity (Min): | 20kV/µs |
Voltage - Isolation: | 5000Vrms |
Inputs - Side 1/Side 2: | 1/0 |
Number of Channels: | 1 |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are devices which allow for the transmission of electrical signals between circuits and components while providing a physical separation between the two. The PC912L0NSZ0F is a logic output optoisolator, designed to transfer digital input logic signals from a low voltage circuit to a higher voltage circuit. In this way, the PC912L0NSZ0F can be used to protect a higher voltage system from faulty or unusual input signals from a lower voltage one. Its applications and working principles will be discussed in more detail below.
Applications
The PC912L0NSZ0F optoisolator provides digital logic signal transmission via photocouplers. The device is primarily employed in applications where isolation of input signals is required, such as communication systems, household appliances, industrial systems and various automation applications.
In communication systems, the PC912L0NSZ0F can be used to isolate input signals from noise caused by other signals in the environment. This can improve the accuracy and speed of data communication, as well as protecting the circuitry from damage caused by electrical interference. The optoisolator is also well suited for applications such as motor control. In this situation, the motor\'s power supply can be isolated from the circuit used to control the motor, thus providing protection from electrical interference or short circuits.
Working Principle
The PC912L0NSZ0F optoisolator works by transferring digital logic signals between two circuits using optical signals, rather than electric signals. This allows for the transmission of digital signals without any electrical contact between the two circuits. The device consists of two parts – an infra-red LED and a phototransistor – which are placed side by side and connected with two insulated wires.
The logic signals from one circuit are sent to the LED, which converts them into an infra-red light signal. This light signal is then received by the phototransistor, which converts it back into a digital logic signal. This signal is then sent to the other circuit, thus providing the desired isolation. The device is highly reliable and can operate over a wide temperature range.
Conclusion
The PC912L0NSZ0F optoisolator is a reliable and effective solution for providing electrical isolation between digital signals transmitted between circuits. The device is particularly well suited for communication systems, motor control applications and various automation tasks. Its working principle involves the use of an LED and a phototransistor to convert electrical signals into optical ones and back again, thus providing an effective level of isolation. Overall, the PC912L0NSZ0F is a versatile and reliable optoisolator which is used in a variety of different applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PC911223KA | TE Connectiv... | 9.53 $ | 1000 | TRIMMER 22K OHM 1W TH22 k... |
PC911102KA | TE Connectiv... | 9.53 $ | 1000 | TRIMMER 1K OHM 1W TH1 kOh... |
PC910L0NSZ | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 5KV OPEN COLLECTO... |
PC910L0YSZ | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 5KV OPEN COLLECTO... |
PC912L0NSZ | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 5KV PUSH PULL 8DI... |
PC910L0YSZ0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 5KV OPEN COLL 8DI... |
PC910L0NSZ0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 5KV OPEN COLL 8DI... |
PC912L0NSZ0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 5KV PUSH PULL 8DI... |
PC911L0YSZ0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 5KV PUSH PULL 8DI... |
PC911L0NSZ0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 5KV PUSH PULL 8DI... |
PC91.07.0100A.DB | Taoglas Limi... | 9.83 $ | 345 | ANTENNA ISM BAND PCB W/CA... |
PC917NP | Laird Techno... | 36.49 $ | 1000 | ANT YAGI CELL 896-940MHZ ... |
OPTOISO 5.3KV TRI-STATE 8SMDLogic Output...
OPTOISO 5KV PUSH PULL 6SSOLogic Output O...
OPTOISO 2.5KV OPEN COLL 8SSOPLogic Outpu...
OPTOISO 1.5KV OPN COLLECTOR 8DIPLogic Ou...
OPTOISO 3.75KV PUSH PULL 8DIP GWLogic Ou...
OPTOISO 7.5KV OPEN COLL 10DIPLogic Outpu...