Allicdata Part #: | PC956L0NSZ0F-ND |
Manufacturer Part#: |
PC956L0NSZ0F |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Sharp Microelectronics |
Short Description: | OPTOISO 5KV OPEN COLLECTOR 8DIP |
More Detail: | Logic Output Optoisolator 2Mbps Open Collector 500... |
DataSheet: | PC956L0NSZ0F Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Data Rate: | 2Mbps |
Supplier Device Package: | 8-DIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 85°C |
Voltage - Supply: | 4.5 V ~ 35 V |
Current - DC Forward (If) (Max): | 25mA |
Voltage - Forward (Vf) (Typ): | 1.6V |
Rise / Fall Time (Typ): | -- |
Propagation Delay tpLH / tpHL (Max): | 550ns, 400ns |
Series: | OPIC™ |
Current - Output / Channel: | 15mA |
Output Type: | Open Collector |
Input Type: | DC |
Common Mode Transient Immunity (Min): | 15kV/µs |
Voltage - Isolation: | 5000Vrms |
Inputs - Side 1/Side 2: | 1/0 |
Number of Channels: | 1 |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are a type of electrical component that is used to provide electrical isolation between circuits. Optoisolators are used in a wide variety of applications in industrial and consumer electronics.
PC956L0NSZ0F optoisolator is a logic output isolated spectral device that combines a 4-pin opto-coupler with a switchable TRIAC output. It can be used to separate the input signal and the output signal from each other, while still sending out appropriate signals. PC956L0NSZ0F has two main applications, including opto-coupled devices and IEEE802.3 Ethernet application.
PC956L0NSZ0F Application Field
The PC956L0NSZ0F opto-isolator is widely used in different kinds of industrial and consumer electronics and can be used as an alternative to other opto-couplers. The maximum rated current is 200mA with operating voltage up to 300V, which makes it suitable for diverse application fields.
- The main application field is in opto-coupled devices. It can provide complete electrical isolation between input and output circuits. It can be used in digital logic circuits to separate different power supplies and avoid any possible interference.
- The second application field is in IEEE802.3 Ethernet applications. The PC956L0NSZ0F opto-isolator can provide the necessary electrical isolation between the Ethernet circuits and other communication protocols. This opto-isolator can also be used to protect the Ethernet circuit from transient voltage spikes and other power surges.
PC956L0NSZ0F Working Principle
The PC956L0NSZ0F opto-isolator works by using an opto-coupler to isolate two electrical circuits and a TRIAC output to switch the load. The opto-coupler consists of an infra-red LED and a photo-transistor. The LED emits infra-red light when powered and the photo-transistor detects this light, generating an electrical signal. This electrical signal is used to control the TRIAC output, which can be used to switch the load.
The opto-isolator is designed so that even if there is a large amount of electrical noise on one side, the other circuit will remain isolated and unaffected. This is because the infra-red light emitted by the LED is not affected by the electrical noise and will always be detected by the photo-transistor. This makes the PC956L0NSZ0F opto-isolator a reliable and effective isolator for different kinds of electronic circuits.
Conclusion
PC956L0NSZ0F opto-isolator is a versatile component that can be used in a wide variety of electronic applications. It can be used to provide complete electrical isolation between input and output circuits, while also protecting the circuit from voltage spikes and other power surges. The working principle of the opto-isolator is based on an opto-coupler and a TRIAC output, which makes it a reliable and efficient isolator.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PC956L0NSZ0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISO 5KV OPEN COLLECTO... |
PC957L0YSZ | Sharp Microe... | 0.0 $ | 1000 | OPTOISOLTR 5KV TRANSISTOR... |
PC957L0YSZ0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISOLTR 5KV TRANSISTOR... |
PC957L0NSZ | Sharp Microe... | 0.0 $ | 1000 | OPTOISOLTR 5KV TRANSISTOR... |
PC957L0NSZ0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISOLTR 5KV TRANSISTOR... |
PC957L0NIP0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISOLTR 5KV TRANSISTOR... |
PC957L0YIP0F | Sharp Microe... | 0.0 $ | 1000 | OPTOISOLTR 5KV TRANSISTOR... |
OPTOISO 5.3KV TRI-STATE 8SMDLogic Output...
OPTOISO 5KV PUSH PULL 6SSOLogic Output O...
OPTOISO 2.5KV OPEN COLL 8SSOPLogic Outpu...
OPTOISO 1.5KV OPN COLLECTOR 8DIPLogic Ou...
OPTOISO 3.75KV PUSH PULL 8DIP GWLogic Ou...
OPTOISO 7.5KV OPEN COLL 10DIPLogic Outpu...