PC9D10

Data Rate:	--
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	0°C ~ 70°C
Voltage - Supply:	4.5 V ~ 5.5 V
Current - DC Forward (If) (Max):	15mA
Voltage - Forward (Vf) (Typ):	1.6V
Rise / Fall Time (Typ):	30ns, 30ns
Propagation Delay tpLH / tpHL (Max):	75ns, 75ns
Series:	OPIC™
Current - Output / Channel:	16mA
Output Type:	Open Collector
Input Type:	DC
Common Mode Transient Immunity (Min):	100V/µs
Voltage - Isolation:	2500Vrms
Inputs - Side 1/Side 2:	2/0
Number of Channels:	2
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PC9D10 Application Field and Working PrincipleOptoisolators - Logic OutputAn optoisolator, also known as an optocoupler or an optical isolator, is an electronic component that provides electrical insulation between two devices by using an optical-based sensing element. It allows two devices to communicate and interact without any direct electrical connection between them. Optoisolators are used to protect sensitive devices such as computers and mobile devices from external electrical noise or damage due to voltage spikes. Additionally, they are also used to isolate signals in noisy environments.The PC9D10 is an optoisolator that can be used as either a logic output or a photovoltaic cell. It is typically used in logic output applications, where it is employed to provide electrical isolation between circuits, as well as noise reduction. The PC9D10 is a 4-pin device, with two pins on either side. On one side, the device contains an IRED LED ( light-emitting diode) and on the other side is a CdS (cadmium sulphide) photodiode. There is also a resistor connected to the cathode and anode pins of the diode.When the LED is powered and emits light, it is detected by the photodiode, which produces a voltage. The voltage produced will depend on the resistor value and the intensity of the light. The output voltage from the LED is limited by the resistance, preventing any permanent damage to the input signal.The PC9D10 is most commonly used in logic output applications, where logic signals from one circuit must be isolated from another circuit. For example, it is used in automotive and industrial applications, where logic signals need to be transmitted across long distances without any interference.The PC9D10 is also used in photovoltaic cell applications, where it is used to convert light energy into electrical energy. It is commonly used in solar-powered products, such as solar panels or solar-powered batteries. In this case, the PC9D10 converts light energy into electrical energy, which can then be stored or used to power other devices.In summary, the PC9D10 is an optocoupler with two pins on either side of the device. It is used in logic output applications to provide isolation between two circuits, as well as for noise reduction. Additionally, it can be used as a photovoltaic cell to convert light energy into electrical energy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description