PCMF3USB30Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common mode chokes, such as PCMF3USB30Z, are components that block interfering signals while passing desired signals. This makes them useful in reducing electromagnetic interference (EMI) in electronic systems. Their most important applications can broadly be categorized as EMI suppression and differential mode current filtering. The PCMF3USB30Z is a common mode choke that is specifically designed for use in USB 3.0 applications.

The PCMF3USB30Z is a common mode filter that consists of two ferrite cores with multiple windings of wire, surrounded by a plastic shell for protection. The windings are wound in opposite directions, meaning the current flowing through each winding will be in opposite directions. This effectively cancels out the common mode noise, as it will be in the same phase and amount in each winding. The differential mode currents are not canceled, and will pass through the filter. This allows the desired signals to pass while suppressing the interfering signals.

There are several different types of common mode filters available, including axial and radial leaded configurations, as well as board-level models such as the PCMF3USB30Z. The type chosen for an application depends on the frequencies they need to filter, as well as the space and cost constraints for the system. The PCMF3USB30Z is a board-level filter designed to filter out high frequencies with minimal space constraints.

The PCMF3USB30Z is unique because its design allows it to work up to 3GHz, allowing for higher speed USB 3.0 data transmission and the filtering of higher frequency EMI. It has an inductance of 0.23uH, a DC resistance of 0.22 ohms, and a peak current rating of 1.5A. It is an effective solution for EMI filtering in USB 3.0 applications, as well as other digital applications.

The working principle of the PCMF3USB30Z is based on Faraday\'s law of induction. This law states that an electric current will create a magnetic field, which in turn will induce a voltage in a conductor. The PCMF3USB30Z takes advantage of this effect to create a magnetic field around the windings which, in turn, will induce a voltage that is opposite in polarity from the current and cancel out the noise. The desired signal passes through the filter undisturbed and can be used.

The PCMF3USB30Z is an effective and cost-efficient way to reduce noise in USB 3.0 applications. Its small size and high frequency filtering make it an ideal solution for integrating into electronic systems to reduce electromagnetic interference. It is important to note that the PCMF3USB30Z is designed for high frequencies and may not be the best solution for signals at lower frequencies.

The specific data is subject to PDF, and the above content is for reference