Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters

A DC-DC converter is a power electronics device used to convert one DC voltage to another. DC-DC converters are most often used in applications involving the conversion of battery voltage to higher voltages required to drive loads such as brushless motors and relays.

PCN1-S12-S5-S application field and working principle

The PCN1-S12 series are DC-DC power converters from Yiyang Technology. They are commonly used in applications such as automotive, transportation, industrial, and home appliances. The PCN1-S12 series are step-down (buck) converters that offer a wide input voltage range of 4.5-36V and an output current of up to 5A.

The PCN1-S12-S5-S is a single output DC-DC converter featuring high-efficiency and high-reliability. It has an input voltage range of 4.5V-38V, and is available in three output voltages, 3.3V, 5V and 12V. It also has a wide output current range of 0.2-5A, and an operating temperature range of -40°C to +85°C.

The PCN1-S12-S5-S is designed with synchronous rectification technology, allowing it to achieve high efficiency and low standby current. It also features over temperature protection, under voltage and over voltage lockouts, input reverse protection and short circuit protection for added safety and reliability. It also provides fast dynamic response, low ripple noise, high power density, and high power accuracy.

The main principle of the PCN1-S12-S5-S is a buck converter. The buck converter is a type of DC-DC converter that stepping up or down a voltage level by controlling the duty cycle of a switch based on a control circuit’s signal. This makes buck converters particularly suitable for regulated output applications, allowing them to offer high power conversion efficiency and fast transient response.

When the PCN1-S12-S5-S is in use, a high frequency square wave voltage with a duty cycle ranging from 0 to 100% is generated by a control circuit, which is used to drive a switch. The switch is connected between the input power supply and the output load, thus controlling the voltage across the load. The duty cycle of the switch is adjusted accordingly to maintain a regulated output voltage.

The specific data is subject to PDF, and the above content is for reference