PD0409J7575S2HF RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Power Dividers, also known as RF Splitters, are a type of passive component that can divide an incoming RF signal into two or more outgoing signals with equal frequency spectrum and a fixed input-output power ratio. The PD0409J7575S2HF is a 4-way RF Power Divider that can be used to divide a wideband RF signal into four equal power signals.

The PD0409J7575S2HF covers frequencies from 50 MHz to 5 GHz in a single unit. It has good spectral matching, a low insertion loss, and a high input and output impedance. It is designed to have low VSWR and low amplitude-to-phase ripple, making it ideal for a variety of applications such as combining and distributing signals, signal power splitting, signal phase generation, and moving or scaling signal power levels.

The PD0409J7575S2HF is made up of two core components: a microstrip input section and a three-port RF power divider. The microstrip input section is a passive component which combines the ground and the input signal line. The three-port RF power divider section divides the input signal into four equal output signals. It is constructed using four-layer technology, with copper microstrip lines for signal paths and microstrip coupled lines for isolation.

The PD0409J7575S2HF is designed to provide excellent phase and amplitude performance and wideband operation. It can handle input power up to 10 Watts, with a typical isolation between outputs greater than 25 dB. It also provides high linearity, low group and phase delay, and very low insertion loss.

The PD0409J7575S2HF has a wide range of applications, including communications systems, microwave links, satellite systems, cellular base-stations, Wi-Fi systems, and other applications that require power dividing capabilities. It is typically used in systems that require multiple signals, such as wireless networks, multiple antenna systems, data transmission links, and multi-channel receivers. The PD0409J7575S2HF is also suitable for adding gain or reducing loss in multi-split systems.

The operating principle of the PD0409J7575S2HF is based on the principle of distributed component technology. The multiple ports of the device are placed in close proximity to each other, so that each port is effectively divided into two halves. This effectively creates multiple ports as each port is seen from the source. The input signal is divided into the four equal outputs which are connected to separate ports of the device.

The PD0409J7575S2HF provides an efficient, low-noise solution for dividing an incoming signal into four equal parts. It has a wide frequency range, excellent linearity and low insertion loss. With its high isolation and low amplitude-to-phase ripple, it is an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference