PD4859J5050S2HF RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF power dividers, also known as RF splitters, are passive devices that divide a single RF signal into multiple identical signals. They can also be used to combine multiple RF signals into the single common signal. Generally, the split ratio of an RF splitter is expressed as power, voltage, current, or in decibels. Decibels are a unit of measure of the logarithm of the ratio of power or voltage in two systems. In the world of RF, the most commonly used type is the Wilkinson power divider. These devices are used in a variety of applications, but they are widely used in communication systems, antenna systems, signal synchronization and switching, and in RF amplifiers.

The PD4859J5050S2HF is an RF power splitter, which is mainly used to split the power and to transfer it to multiple loads. It has a wide range of operating frequencies, up to 900 MHz. It has an insertion loss of 0.2 dB and an isolation of 24 dB. It also has a reverse isolation of 17 dB. It is designed to have an equal power division for each load, with rejections of up to 20 dB. It is a low-noise power splitter with a 50 Ohm RF input impedance.

The PD4859J5050S2HF is used in a variety of applications, including antenna systems, control systems, and radio systems. It can be used to split a single signal into multiple outputs, enabling the sharing of signal between multiple radios or devices. In antenna systems, it can be used to broadcast signal evenly over a wide area. This device is also well-suited for use in control and radio systems, allowing for the sharing of signal between multiple users.

The working principle of the RF power splitter is relatively simple. The device is constructed of two impedance matching transmission lines which are connected together in a dedicated “3” configuration. The RF signal is injected into a single input on the splitter, and is then distributed evenly among the multiple output ports on the splitter. The power is then divided in a way that is proportional to the impedance matching of the transmission lines. The power division ratio is dependent on the lengths of the transmission lines and is generally stipulated as a ratio of 1:3.

In conclusion, the PD4859J5050S2HF is an RF power splitter that is mainly used to split and transfer signal power to multiple loads. It has a wide range of operating frequencies and is designed to have an equal power division for each output. It is used in a variety of applications, including antenna systems, control systems, and radio systems. The operating principle of the RF power splitter is as described earlier, that the power is divided in a way that is proportional to the impedance matching of the transmission lines. The power division ratio is dependent on the length of the transmission lines.

The specific data is subject to PDF, and the above content is for reference