PDM2-S12-D9-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters bridge the gap between AC power sources, such as batteries or solar cells, and DC loads. The most common application with DC-DC converters is to convert voltage levels, as well as provide isolation and power conversion. A converter that provides both voltage conversion and isolation is called an isolated DC-DC converter. The particular type of converter are critical for applications such as medical, ITE, telecom, aerospace, instrumentation, and automotive systems.

The PDM2-S12-D9-D is a type of DC/DC converter which is designed specifically for providing isolation and conversion. This type of converter can typically be found in applications where a lower voltage needs to be converted into a higher voltage, or a higher voltage needs to be converted into a lower voltage. The PDM2-S12-D9-D converter is specifically designed for higher power applications, with the capability of providing an output voltage of up to 200V. It can also provide an output current of up to 10A for higher power applications, making it ideal for powering components such as motors, LEDs, and other electronic circuits.

The PDM2-S12-D9-D converter utilizes two separate stages of conversion, using transformers and switching components. The primary side of the transformer is connected to the input voltage source, while the secondary side of the transformer is then connected to the output voltage source. The primary side of the transformer is then controlled by a power switch, such as a MOSFET or IGBT, which is driven by a pulse width modulation (PWM) signal. This PWM signal is based on a reference voltage that determines the duty cycle of the power switch, thus providing precise control of the output voltage.

In addition to the transformer, the PDM2-S12-D9-D converter also utilizes several other components including rectifiers, diodes, inductors, and capacitors. The rectifiers allow for the rectification of the input voltage, while the diodes regulate the flow of charge between the primary and secondary sides of the transformer. The inductors and capacitors are designed to filter out noise and enhance the performance of the converter. By utilizing these components, the PDM2-S12-D9-D can provide a high efficiency, low ripple, and non-isolated output with precise voltage control.

The PDM2-S12-D9-D converter can be used in a variety of applications, ranging from automotive to industrial. In automotive applications, this converter can be used for providing under-hood power for components such as starter motors and fuel pumps. In industrial applications, it can be used for powering process equipment and for providing high voltage outputs in isolated environments. This makes the PDM2-S12-D9-D ideal for a wide range of applications where precise voltage control and power conversion is required.

The specific data is subject to PDF, and the above content is for reference