PF0464.123NLT

Fixed inductors, as the name suggests, have a fixed inductance. These components usually consist of an insulated wire or a large number of wound turns around a ferromagnetic core and a non-magnetic layer.Fixed inductors are widely used in a variety of different applications across the electrical and electronics industry. The PF0464.123NLT fixed inductor is one such device and is designed to meet the needs of high-current or high-power circuit designs.

The PF0464.123NLT is designed to be used for DC/DC converters, resonant converters, snubber and capacitor balancing circuits. It is composed of ferrite core and aluminum-capped windings, which enable it to meet the needs of high-current designs due to its high Q and lower impedance. The device is available with a range of turns from 4-40 turns, which makes it suitable for designs with varying inductance needs. The device can be used in both positive and negative temperature coefficients, allowing it to be used in a wide variety of applications.

In terms of its working principle, the PF0464.123NLT fixed inductor operates in a similar fashion to any other type of inductor. An alternating current is applied to the winding to create a changing magnetic field, which in turn creates an electrical signal (emf) in the winding. As per Faraday’s law of induction, this changing magnetic field creates a voltage in the winding which is proportional to its inductance value. The devices use the concept of back EMF, which increases its efficiency when switching between two signals. The core material of the device offers high permeability which ensures that it is able to handle large amounts of power without significantly heating up.

The device also has several additional features which make it suitable for use in a wide range of applications. It has a very small resonance frequency, which allows it to operate in a wide frequency range as compared to other inductors with a higher resonance frequency. The device also has a very low switching loss, making it suitable for high-frequency applications such as power conversion. Additionally, the device has a low interwinding capacitance, which prevents it from creating noise in high-frequency circuits. Its high Q allows it to be used in applications where precise control of signal frequencies is required.

In conclusion, the PF0464.123NLT is a fixed inductor that is designed for use in DC/DC converters, resonant converters, snubber and capacitor balancing circuits. It uses a ferrite core and aluminum-capped windings to offer high Q and low impedance. It is capable of operating in a wide frequency range, with a low switching loss and low interwinding capacitance. It is suitable for high-frequency and high-power applications, where precise control of frequencies is required.