PG0926.722NL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, often referred to as chokes, are some of the oldest and most widely used types of passive electronic components. The variety of applications for fixed inductors is vast, from use as AC line filters to transformers and antennae. The PG0926.722NL fixed inductor is a versatile component that can be used in a variety of applications, with its working principles explained in detail below.

A fixed inductor is a coil of wire with some type of core material wrapped inside. The core material is usually either ferrite or iron powder, depending on the inductance that needs to be achieved. The PG0926.722NL can be used for applications in which the inductance needs to be adjusted because it is a variable-inductance type. It also has an incredibly high working frequency, reaching up to 1MHz.

When electricity is applied to the inductor, a magnetic field is created around the coil. This field will then induce an EMF in the coil which opposes the applied voltage. This is also known as “Back EMF”. The resulting current in the coil varies inversely with the Back EMF, causing the current to decrease with increasing frequency. This phenomenon is known as magnetic saturation and it is the basis of the induction process.

The PG0926.722NL can be used to produce a regulated output voltage with a DC source by passing the DC current through the inductor. When a voltage is applied to the inductor, it produces a magnetic field which induces a Back EMF into the inductor. By adjusting the voltage applied to the inductor, the current flowing through it can be adjusted. This allows the output voltage to be regulated.

The PG0926.722NL can also be used for Switch Mode Power Supplies (SMPSs). These devices use the principle of CONAR (coulomb/second non- inductive reactive) current conduction. By alternating between a positive and negative current, power can be more efficiently transferred from the primary to the secondary transformer. The PG0926.722NL helps to reduce energy losses by increasing the conduction rate of the CONAR current, resulting in increased efficiency and reduced heat generation.

The PG0926.722NL can also be used for noise filtering. Noise filtering is a vital process in power supplies and other electronic circuits. By passing an AC current through the inductor, the high and low frequencies of the AC current can be filtered out and only the desired frequency will be left. This helps to reduce the amount of noise in the output signal.

Overall, the PG0926.722NL is a versatile component that can be used in many different applications. Its high frequency working, adjustable inductance and CONAR current conduction capabilities make it a perfect fit for various power electronics and noise filtering applications.

The specific data is subject to PDF, and the above content is for reference