PI6CV2304WE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PI6CV2304WE device is a Clock/Timing - Clock Buffers, Drivers device. It is usually used in chip-to-chip, board-to-board, and intra-board applications. The PI6CV2304WE device is an 8-bit working level translator. There are two separate logic clock domains with the same fixed frequency. Its high speed and low skew clock buffering architecture offers a cost-effective solution for clock generation, distribution and multiplexing applications. Depending on the application, the typical data rate for the source is between 1-500MHz. In addition, the PI6CV2304WE is ideal for buffering clocks for frequency conversion and for adding timing margins in mixed-signal systems.

The working principle of the PI6CV2304WE device involves the following steps. The device contains two 8-bit registers, A and B. Data bytes can be registered in either register. When the device is clocked, the bytes are transferred between the A and B registers. The A and B registers are connected such that data written to the A register will be shifted to the B register when the device is clocked. When the device is clocked again, the bytes will be shifted back to the A register. Data can also be shifted in the opposite direction, from the B register to the A register. The PI6CV2304WE device will indefinitely cycle between the two registers, allowing for data to be transferred between two separate logic domains at the same frequency. The two domains are the input domain and the output domain. Data from the input domain will be registered in the A register, and then shifted to the B register when the device is clocked. Data from the B register is then sent to the output domain.

The clock frequency for the PI6CV2304WE device is fixed, but the skew between the two domains can be adjusted. The device has an adjustable differential signal, which can be used to control the skew between the two domains. Using this signal, the skew between the two domains can be adjusted to meet the requirements of the application. In addition, the device has an enable signal, which can be used to enable or disable the device, allowing the data to be paused momentarily.

The PI6CV2304WE device is a versatile device that is useful in a variety of applications. It can be used to buffer clocks, reduce skew, and add timing margins in mixed-signal systems. In addition, the device is useful in data transfer applications, as it can transfer data between two separate logic domains at the same frequency. The adjustable differential signal allows the skew between the two domains to be adjusted, and the enable signal can be used to enable or disable the device.

The specific data is subject to PDF, and the above content is for reference