PL600-27TTC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PL600-27TTC is a fully synthesizable frequency synthesizer designed for a variety of applications. It is ideal for high-performance clocking and timing solutions in both commercial and industrial applications. The PL600-27TTC is capable of providing frequencies from 200kHz to sync frequencies up to 150Mhz. The PL600-27TTC is a non-volatile memory controlled Device that can store up to eight different frequencies for selection or phase adjustment.

The PL600-27TTC\'s advanced architecture allows for high speed, low power operation and superior noise immunity. With its low phase noise, it is also well suited for high-performance applications such as frequency synthesizers and phase-locked loops (PLLs). The PL600-27TTC can support up to four selectable output ports with buffered, low-skew clock outputs.

The basic block diagram of the PL600-27TTC is shown in Figure 1. It consists of the following components: a phase-locked loop (PLL), a digital frequency synthesizer and an on-chip voltage regulator.

The phase-locked loop (PLL) block is responsible for executing the frequency tuning and phase synchronization. The PLL consists of a phase detector, a loop filter, a voltage-controlled oscillator (VCO), and a frequency divider. The phase detector monitors the difference between the reference frequency input, applied to the PLL, and the output frequency of the VCO. The loop filter is used to limit the gain of the PLL, ensuring operation in the desired frequency range. The output from the loop filter is typically controlled by a voltage-controlled crystal oscillator (VCXO). In the PL600-27TTC, the output of the VCXO is further filtered to improve performance.

The digital frequency synthesizer is used to generate a wide range of frequencies with well-controlled output jitter. The PL600-27TTC can generate up to 8 frequency outputs, each of which can be programmed using the device\'s on-chip EEPROM. The digital synthesizer can be programmed with up to 16 different frequencies and can be used to change the reference frequency of the PLL.

The PL600-27TTC also includes an on-chip voltage regulator, which provides a stable power supply for the PLL and digital synthesizer. This regulator can be programmed to provide a wide range of output voltages to match the specific needs of the application.

The PL600-27TTC can be used for a variety of applications as a clock generator, frequency synthesizer, and PLL. In addition, it can be used for phase shifting, jitter reduction, and phase noise reduction. The PL600-27TTC is also well-suited for applications such as wireless transmission, satellite communications, data communications, and on-board instrumentation.

In summary, the PL600-27TTC is a powerful and versatile frequency synthesizer optimized for high performance clock and timing applications. With its low phase noise, wide frequency range, and low power operation, it is ideal for a variety of applications, including wireless transmission, satellite communications, data communications, and on-board instrumentation. In addition, it can be used for phase shifting, jitter reduction, and phase noise reduction.

The specific data is subject to PDF, and the above content is for reference