PLH10AN1612R1P2B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes (CMCs) are a type of electrical component that is used to block or reduce the flow of current in a circuit. They are used to protect sensitive circuits from being overloaded or damaged. CMCs are also used to reduce electromagnetic interference (EMI) from one circuit to another. The PLH10AN1612R1P2B CMC is an industrial-grade component designed for use in demanding applications.

The PLH10AN1612R1P2B CMC is designed for use in high-impedance power applications, such as high-frequency motor drives, high-power AC and DC inverters, and high-frequency DC-to-DC converters. It can be used in applications such as signal isolation, EMI suppression, and surge protection. The CMC consists of two coupled coils wrapped around a ferrite core. The coils can be either connected in series or parallel, depending on the application.

The working principle of the PLH10AN1612R1P2B CMC is based on the concept of inductive reactance. Inductive reactance occurs when a changing electric current flows through a conductor. As the current changes, it induces a voltage in the conductor, which opposes the change in current. This opposition to change in current results in a decrease in overall power being delivered to the connected load. The amount of inductive reactance depends on the properties of the wire, the number of turns in the coil, and the frequency of the current.

The PLH10AN1612R1P2B CMC uses this effect to reduce common-mode current in a circuit. The common-mode current is the current that flows in both wires in the same direction. By placing the CMC in the circuit, the current in both the wires is reduced, thus resulting in reduced noise and distortion. The CMC also increases the voltage-to-current ratio, which allows for better power conversion and improved efficiency.

The PLH10AN1612R1P2B CMC is designed for use in a wide range of applications, including aircraft, automotive, communication, processing, and consumer electronics. It is used to provide EMI immunity to sensitive components and to protect them from damage due to overvoltage or overcurrent. The CMC is easy to install, with no complicated setup required. This makes it ideal for use in high-powered, high-frequency applications where space is limited.

The PLH10AN1612R1P2B CMC is a reliable and high-performance industrial-grade component. It is designed to reduce common-mode current and increase voltage-to-current ratios, making it ideal for use in high-power applications. The CMC is also easy to install, making it an ideal choice for demanding applications.

The specific data is subject to PDF, and the above content is for reference