Allicdata Part #: | 1110-3934-ND |
Manufacturer Part#: |
PM-K65-P |
Price: | $ 10.96 |
Product Category: | Sensors, Transducers |
Manufacturer: | Panasonic Industrial Automation Sales |
Short Description: | SENSOR SLOT PNP |
More Detail: | Optical Sensor Transmissive 0.236" (6mm) Module, C... |
DataSheet: | PM-K65-P Datasheet/PDF |
Quantity: | 733 |
1 +: | $ 9.96030 |
5 +: | $ 9.75492 |
10 +: | $ 8.12889 |
25 +: | $ 7.51919 |
50 +: | $ 7.31605 |
100 +: | $ 6.29987 |
500 +: | $ 5.89345 |
1000 +: | $ 5.58861 |
Series: | PM-65 |
Part Status: | Active |
Sensing Distance: | 0.236" (6mm) |
Sensing Method: | Transmissive |
Output Configuration: | PNP - Open Collector |
Mounting Type: | Chassis Mount |
Current - Supply: | 15mA |
Voltage - Supply: | 5 V ~ 24 V |
Response Time: | 20µs |
Operating Temperature: | -25°C ~ 55°C (TA) |
Package / Case: | Module, Connector, Slot Type |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical sensors are a type of sensor that uses light or infra-red radiation to detect objects or changes in its environment, either through physical or chemical changes. The PM-K65-P is an optical sensor that falls into the category of Photointerrupters, more specifically Slot Type Logic Output type.
The main purpose of the PM-K65-P is to detect the presence of objects based on the interruption of a light source. The PM-K65-P makes use of a gap-type photosensor which consists of an infrared emitting diode and an NPN silicon phototransistor. The two components are arranged in a structure where one emits light and the other receives it, right opposite each other. The light emitted by the infrared diode is received by the phototransistor and can be interrupted by the presence of an object in its path. When this occurs, the transistor switches on and its output is used as a logic signal to indicate the presence of the object.
The PM-K65-P is typically used in industrial applications, where it is used to detect the presence of objects like paper, cardboard boxes, and plastics. It is also used in automated packaging solutions for product identification, counting, and collating. The PM-K65-P is also suitable for installation in home security systems, and is used in robotic applications for presence detection.
The PM-K65-P is an optical sensor with a unique set of features. It is designed to be robust and reliable, and has an extended operating temperature range of -13 to 158°F (-25 to 70°C). In addition, this sensor also has a high frequency response up to 3kHz, making it suitable for fast response applications. Finally, the PM-K65-P offers a wide range of mounting options, from automated mounting systems to screw or bolted mounting.
The working principle of the PM-K65-P is fairly simple. When light is incident on the detector, it is detected by the phototransistor and its output is used as a logic signal to indicate the presence of the object. When the beam is interrupted by the object, the output is switched on, indicating the presence of the object.
In conclusion, the PM-K65-P is an optical sensor which falls into the category of Photointerrupters, and is mainly used in industrial applications. It is designed to be robust and reliable, with an extended operating temperature range and a high frequency response up to 3kHz. The working principle of the PM-K65-P is also fairly straightforward, and involves the interruption of light by objects to provide a logic signal indicating the presence of the object.
The specific data is subject to PDF, and the above content is for reference
SENSOR TRANS OPAQUE OPTOSCHMITTOptical S...
SWITCH SLOTTED OPT W/WIRE LEADSOptical S...
SWITCH PHOTOLOGIC OPTICAL FLAGOptical Se...
SENSOR 56CH 10MM 24VDC NPNOptical Sensor...
PHOTOINTERUPTER TRANSMISSIVEOptical Sens...
OPTO SENSOR SLOT TYPE 3.6MMOptical Senso...