Allicdata Part #: | 1110-3935-ND |
Manufacturer Part#: |
PM-T65-P |
Price: | $ 10.96 |
Product Category: | Sensors, Transducers |
Manufacturer: | Panasonic Industrial Automation Sales |
Short Description: | SENSOR SLOT PNP |
More Detail: | Optical Sensor Transmissive 0.236" (6mm) Module, C... |
DataSheet: | PM-T65-P Datasheet/PDF |
Quantity: | 283 |
1 +: | $ 9.96030 |
5 +: | $ 9.75492 |
10 +: | $ 8.12889 |
25 +: | $ 7.51919 |
50 +: | $ 7.31605 |
100 +: | $ 6.29987 |
500 +: | $ 5.89345 |
1000 +: | $ 5.58861 |
Series: | PM-65 |
Part Status: | Active |
Sensing Distance: | 0.236" (6mm) |
Sensing Method: | Transmissive |
Output Configuration: | PNP - Open Collector |
Mounting Type: | Chassis Mount |
Current - Supply: | 15mA |
Voltage - Supply: | 5 V ~ 24 V |
Response Time: | 20µs |
Operating Temperature: | -25°C ~ 55°C (TA) |
Package / Case: | Module, Connector, Slot Type |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical sensors are devices used for detecting presence, absence, or a change in the intensity of a light source, typically visible or infrared light. Photointerrupters are a type of optical sensor used for detecting the passing of an object in a sensing area. Slot type photointerrupters are sensors which detect the passing of an object within a slot. One such example of a slot type photointerrupter is the PM-T65-P.The PM-T65-P is a slotted photoeye made specifically for use in industrial settings, including machine automation, warehouse protective guards, industrial control mechanisms, and safety systems. Its construction consists of a compact, durable plastic body and a custom circuit board.The device consists of an emitter and a detector separated by the slot, with the two components placed in a synchronized position. Light emittes from the emitter in a meter-wide beam, and when an object passes through this slot, the light beam is interrupted or blocked, resulting in an electrical signal output. The pulse duration of this output signal is determined by the surface speed of the passing object, with longer output pulses corresponding to slower speeds.The PM-T65-P has two sets of wiring, both three wire and four wire configurations. The three wire configuration is used in a logic output application, where a short or long pulse signal is sent through three wires to indicate the presence or absence of an object in the slot. In a four wire configuration, the two additional wires enable continuous monitoring of the blockage of the slot. In terms of logic output, the PM-T65-P has a two-state output signal, with a low-level voltage indicating the presence of an object within the sensing slot, and a high-level voltage indicating the absence of an object. This makes it well-suited for use in circuits requiring on/off signals, such as those used in automated motor control systems.The PM-T65-P’s wide operating temperature range, from -25\xb0C to +70\xb0C, makes it suitable for many industrial applications. The device has an industrial-grade design to help protect it from dust, debris, and corrosive materials, and its high-quality construction helps to ensure reliable operation and long life.In summary, the PM-T65-P is a slotted photoeye designed for industrial use, with a three wire logic output configuration and a wide operating temperature range allowing it to be used in a variety of applications. The device sends out an electrical signal when an object passes through the optical slot, with the pulse duration of this signal determined by the speed of the passing object. It is a reliable, durable, and cost-effective way of sensing the presence or absence of objects.
The specific data is subject to PDF, and the above content is for reference
SENSOR TRANS OPAQUE OPTOSCHMITTOptical S...
SWITCH SLOTTED OPT W/WIRE LEADSOptical S...
SWITCH PHOTOLOGIC OPTICAL FLAGOptical Se...
SENSOR 56CH 10MM 24VDC NPNOptical Sensor...
PHOTOINTERUPTER TRANSMISSIVEOptical Sens...
OPTO SENSOR SLOT TYPE 3.6MMOptical Senso...