PM0805-R15K-RC

DC Resistance (DCR):	670 mOhm
Height - Seated (Max):	0.059" (1.50mm)
Size / Dimension:	0.083" L x 0.059" W (2.10mm x 1.50mm)
Supplier Device Package:	0805 (2012 Metric)
Package / Case:	0805 (2012 Metric)
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100MHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	950MHz
Q @ Freq:	50 @ 250MHz
Series:	PM0805
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	400mA
Tolerance:	±10%
Inductance:	150nH
Material - Core:	Alumina
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are components used in a wide variety of electronic systems, from the most basic circuits to the most complex. An example of a fixed inductor is the PM0805-R15K-RC. This component is used in applications such as power supply circuits, switch mode power supplies (SMPS), resonant circuits, and radio frequency (RF) systems. In this article, we\'ll cover the PM0805-R15K-RC application field and working principle. In terms of application field, this component finds wide use in switch mode power supplies (SMPS), also known as switching power supplies. This type of power supply converts input DC volts to a pulse width modulated (PWM) square wave, which can be used to achieve a higher power conversion efficiency than conventional linear power supplies. As the output voltage and current levels increase, so does the switching frequency, meaning that a high frequency output is required. For this reason, the PM0805-R15K-RC is well suited for use in switch mode power supplies.In resonant circuits, the inductor may be used to produce a high-Q resonance that increases the power gained from the resonator and increases the selectivity of the circuit. The inductor can also be used to construct a notch filter that passes a certain frequency with maximum efficiency while attenuating other frequencies.In RF systems, the PM0805-R15K-RC can be used as a part of an antenna circuit or as part of a tuned circuit. The inductor can be used to match the impedance of the antenna and the tuner can be used to tune a bandwidth for optimum signal reception and transmission.The working principle of the PM0805-R15K-RC is based on the ability of electromagnetic radiation to act as a medium for converting energy from one form to another. This principle is applied to inductors where the electromagnetic radiation is used to induce a magnetic field around an electrical conductor and an electrical current is created in the conductor as a result of the magnetic field. The size of the electrical current is determined by the diameter and length of the conductor, as well as the number of turns around the core. The strength of the magnetic field is determined by the number of turns of the conductor and the type of core material used. The PM0805-R15K-RC uses a ferrite core material, which is known for its high permeability, allowing it to create a strong magnetic field. As the current increases, so does the magnetic field strength, thus producing a larger inductor value.Due to its size and low cost, the PM0805-R15K-RC is used in a variety of circuit applications, from switch mode power supplies to resonant circuits and RF systems. The component is used due to its ability to produce high frequencies and large inductor values. The component offers great stability and reliability, making it a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description