PM3BWD

Current:	25mA
Features:	--
Ingress Protection:	--
Termination Style:	PC Pin
Viewing Angle:	40°
Wavelength - Peak:	430nm
Millicandela Rating:	10mcd
Lens Style/Size:	Round with Domed Top, 3mm (T-1)
Panel Cutout Dimensions:	0.16" (4.06mm)
Panel Cutout Shape:	Round
Series:	PM3
Voltage:	4V
Ratings:	Vf (Typ), If (Max)
Lens Transparency:	Diffused
Lens Color:	Blue
Lamp Color:	Blue
Moisture Sensitivity Level (MSL):	--
Type:	LED
Lead Free Status / RoHS Status:	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Panel Indicators, Pilot Lights

PM3BWD is an indication, mark and warning device designed to provide maximum reliability and safety for any operational environment. It is a three-phase electrical panel indicator designed to indicate the presence or absence of a primary voltage. It is designed to be mounted in an electrical panel as a form of visual control.The purpose of the PM3BWD panel indicator is to inform operators of the presence or absence of a primary voltage in an electrical system, typically three-phase AC or DC. This is usually done to notify operators of potential overloads or outages that may occur in the system. The indicator itself is designed to be directly wired to the incoming power line, and then to be wired to the panel it is installed in.PM3BWD panel indicators work on a two-wire system which means it can be used with either a DC or AC source. On the DC side, the indicator operates by measuring the voltage using a built-in voltage sensing circuit which then closes a switch in the indicator when the voltage reaches a predetermined level. On the AC side, the indicator operates by measuring the current using a built-in current sensing circuit which then closes a switch in the indicator when the current reaches a predetermined level. PM3BWD panel indicators are equipped with a circuit breaker to provide additional protection in the event of a fault or overload. This circuit breaker disconnects the power supplied to the indicator whenever the system is under overload or in the event of a fault or surge. This is to protect the panel and the personnel working with the panel from the potential dangers associated with a power surge. PM3BWD panel indicators are available in a variety of sizes and configurations. It is most commonly used with a 110-volt AC or DC power supply but is also available for higher voltage applications. PM3BWD also features a built-in light system to provide more visible indication of the status of the system. The lights are typically illuminated either red or green and can be used as a visual indication of an overloaded system or outages.The PM3BWD panel indicator is a reliable and cost-effective way to monitor the power in an electrical panel. It is easy to install and maintain and provides a reliable and efficient way to monitor and prevent potential problems in the system. It is also an ideal solution for providing visual indication of electrical system status.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description