PM428S-5R6-RC

DC Resistance (DCR):	85 mOhm Max
Height - Seated (Max):	0.118" (3.00mm)
Size / Dimension:	0.189" L x 0.189" W (4.80mm x 4.80mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	69MHz
Q @ Freq:	9.56 @ 7.96MHz
Series:	PM428S
Shielding:	Shielded
Current - Saturation:	1.2A
Current Rating:	1.38A
Tolerance:	±30%
Inductance:	5.6µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Fixed Inductors

Fixed inductors are passive components used in many product designs, such as power supplies, radio frequency circuits, and electronic filters. They are commonly used in a wide range of audio, video, and communication systems. These inductors are designed to convert electric energy to magnetic energy and vice versa. They are mainly composed of a coil of wire wrapped around an iron core or other conductive material.

What is PM428S-5R6-RC?

PM428S-5R6-RC is a type of fixed inductor. It is made of iron core and wire wrapped in aluminium. It has a maximum direct current rating of 5A and a resistance of 0.6 ohms. The inductance of the device is 4.28 mH (milli-Henry). The device has a rated voltage of 25V and can operate up to temperatures of 125°C.

PM428S-5R6-RC Application Field and Working Principle

PM428S-5R6-RC can be found in power supplies, radio frequency circuits, and electronic filters. It is used to reduce and store energy in the form of a magnetic field and to convert it back to electrical energy.When a current is applied to the iron core of the PM428S-5R6-RC inductor, it induces a magnetic field which, in turn, causes an increase in the magnetic flux density at the coil. This induces an electromotive force (EMF) which is proportional to the rate of change of magnetic flux linkage. The EMF generated can be used to effectively react against the applied current in the circuit.These inductors can also be used to filter out unwanted signals and create regulated output. This can be achieved by using the inductor as a filter or as an energy storage device. An inductor can be connected in series with the circuit in order to create a low-pass filter, whereby lower frequencies are passed and higher frequencies are blocked. This can be used to reduce interference and noise in a circuit. An inductor can also be used as an energy storage device. When a current is applied to the inductor, the magnetic field increases, storing energy in the form of magnetic field. This energy can then be released back into the circuit as desired.

Advantages of PM428S-5R6-RC

PM428S-5R6-RC has many advantages over other types of inductors. It is resistant to high temperatures, has a low electrical resistance, and has good linearity. The inductor is also highly efficient, meaning it can convert more energy with less power than many other types of inductors. This makes it an ideal component for many power applications.

Conclusion

PM428S-5R6-RC is an important type of fixed inductor for use in many design applications. It is made of an iron core and wire wrapped in aluminium and has a maximum direct current rating of 5A. This inductor is resistant to high temperatures, has a low electrical resistance, and has good linearity. It is used in power supplies, radio frequency circuits, and electronic filters. Through induction, this inductor has the ability to convert electric energy to magnetic energy and vice versa. It can also be used to filter out unwanted signals and create regulated output. Overall, the PM428S-5R6-RC is a very useful component for many design applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description