PM5022H-100M-RC

DC Resistance (DCR):	17.2 mOhm
Height - Seated (Max):	0.307" (7.80mm)
Size / Dimension:	0.866" L x 0.591" W (22.00mm x 15.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	20MHz
Q @ Freq:	53 @ 5MHz
Series:	PM5022H
Shielding:	Unshielded
Current - Saturation:	10A
Current Rating:	6.5A
Tolerance:	±20%
Inductance:	10µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors
Inductors are components used to store energy in the form of electron flow wrapped around a core. They do this by inducing a voltage in the coil that is strong enough to cause an electric current in an otherwise open circuit. A fixed inductor is a passive electronic component that is constructed to have a fixed inductance, meaning that the electric field caused by the component is unchanged over time. The PM5022H-100M-RC is a surface mount fixed inductor made by Sumida Electric Co., Ltd. and is used primarily in consumer electronics.

The PM5022H-100M-RC is a non-shielded, thick film chip inductor with a resonance frequency of approximately 800 MHz. It has an inductance of 100 micro henries with a tolerance of ±5%. The PM5022H-100M-RC has excellent self-resonance behavior and low noise. The core material of the component is ferrite. This type of inductor is perfect for applications that require high impedance, such as antennas or power lines. The PM5022H-100M-RC is a relatively high-power component and can be used in power supplies, DC-DC converters, or switch mode transformers.

The working principle behind fixed inductors is similar to that of all inductors. When a current is applied to the coils of the inductor, the electric field causes a voltage across the component. This voltage is inversely proportional to the rate of change of the current as the opposing magnetic field tries to slow down the induced current. This phenomenon is known as inductance. When the current stops flowing, the voltage stays the same, and the component stores the energy in its magnetic field until the current begins flowing again. The magnetic field is what creates the inductance in fixed inductors, so this phenomenon is crucial for their function.

The PM5022H-100M-RC is used primarily in consumer electronics such as cell phones, tablets, and other mobile devices. It is used in applications where the need for high impedance is key, and any fluctuation in the electric field should be minimized. Its resonance frequency of 800 MHz makes it suitable for use in antennas or power lines, and its ferrite core material minimizes any interference from outside sources. The tolerance of ±5% also ensures that its performance remains stable over time, even in fluctuating environments. The PM5022H-100M-RC is an excellent component that is perfect for many different applications and can provide reliable operation over time.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description