PM75-100K

DC Resistance (DCR):	70 mOhm Max
Height - Seated (Max):	0.209" (5.30mm)
Size / Dimension:	0.307" L x 0.307" W (7.80mm x 7.80mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	2.52MHz
Operating Temperature:	-30°C ~ 100°C
Ratings:	--
Frequency - Self Resonant:	28MHz
Q @ Freq:	--
Series:	PM75
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	2.3A
Tolerance:	±10%
Inductance:	10µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components designed to store energy within a reactive magnetic field. They are essential in a wide range of electronics applications in both switch mode power supplies and analog circuits. The PM75-100K is a type of fixed inductor which includes E-cores, POT cores, and antennas commonly used in wide range rate circuit designs. E-Cores are the most commonly used inductors in the PM75-100K range, and they are also known as toroidal cores or pot cores. E-Cores are split-core rings with rectangular-shaped cross-sectional areas to allow for maximum energy storage. They are composed of a ferrite-filled core of two non-magnetic parts, one of which forms the primary winding of the inductor.POT Cores are also part of the PM75-100K range and are used to create a fixed inductor with a single coil winding. The core is composed of a ferrite-filled binder and two non-magnetic hexagonal-shaped rings, one of which forms the primary winding of the inductor. The core also contains a secondary winding formed of a solid ferrite ring to complete the magnetic circuit.Finally, the range also includes antennas used to create RF signals in antenna designs. These antennas are constructed using a ferrite-filled core and a dual-wound coil on theprimary winding section. The combination of these two components creates an RF signal with a frequency determined by the physical size and type of the core.In summary, the PM75-100K range of fixed inductors includes E-cores, POT cores, and antennas which are used in wide range rates circuit designs. E-cores are the most commonly used type of inductor and are composed of two non-magnetic parts, one of which forms the primary winding. POT cores are also available and are composed of two non-magnetic hexagonal-shaped rings, one of which forms the primary winding of the inductor. Finally, the range includes antennas composed of a ferrite-filled core and a dual-wound coil on the primary winding section

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description