PNP300JR-73-2R2 Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

The PNP300JR-73-2R2 is an example of a through-hole resistor. Through-hole resistors, as the name implies, are resistors that are mounted on Printed Circuit Boards (PCBs) by passing through holes in the PCB and soldered to the back side of the board.

PnP300JR-73-2R2 Application Field and Working Principle

The PNP300JR-73-2R2 is a resistive element used for general purpose electronic applications. It is usually used as a voltage divider, current sensor, or protection device in applications like power management, motor control, audio, and graphics.

The PNP300JR-73-2R2 works on the principle of Ohm\'s law, which states that the current through a conductor between two points is directly proportional to the voltage across the two points. This law states that the resistance value of a PNP300JR-73-2R2 is determined by its dimensions and will not change with temperature. The PNP300JR-73-2R2 is usually marked with a four-digit resistor code, which indicates the resistance value of the resistor.

The PNP300JR-73-2R2 is a through-hole resistor. It consists of a cylindrical body with two pins. The two pins are inserted through a hole in the PCB, and then soldered to the bottom side of the board. The two pins are connected together, so when a voltage is applied, current flows from one pin to the other. This current flow, which is determined by Ohm\'s law, is then used to measure the voltage or to control the amount of current being drawn from the circuit.

The PNP300JR-73-2R2 is a very cost-efficient solution for a wide variety of electronic applications. Its robust construction, simplicity, and high accuracy make it a great choice for any electronic application. In addition, its large size and high power rating make it suitable for providing power for more complex electronic circuits.

Conclusion

The PNP300JR-73-2R2 is an example of a through-hole resistor. It works on the principle of Ohm\'s law and is usually marked with a four-digit resistor code. The PNP300JR-73-2R2 is a cost-efficient and reliable choice for many electronic applications, from voltage dividers and current sensors to complex power control circuits.

The specific data is subject to PDF, and the above content is for reference