PNS100JT-52-5R1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The Through Hole Resistors (THR) are components which are designed to resist a voltage through a layer or barrier within the electrical circuit. This barrier may be formed by a conductor which is placed between two resistors, such as a wire or a thin metallic layer. The THR, PNS100JT-52-5R1 is a type of THR which is commonly used in industrial, healthcare and automobile applications.The THR is composed of a ceramic sheet which is dielectric-coated with an insulating layer. The ceramic layer is then sintered with copper electrodes, forming a resistor network. This is why the THR is often referred to as "Ceramic-Coated Resistor Networks". The sintering process is also used to ensure a uniform and consistent distribution of the resistive layer.The THR, PNS100JT-52-5R1 is composed of two ceramic sheets with five copper electrodes that are pressed together and then sintered together. The thickness of the dielectric material controls the strength of the bond between the two ceramic sheets, and also affects the device’s maximum power dissipation.The THR is designed to provide a resistance value which is proportional to the voltage applied to it. The resistance of the THR is directly proportional to the applied voltage and the resistance value can be changed by by increasing or decreasing the voltage applied to it. The resistance of the THR can also be controlled by adjusting the thickness of the dielectric material and the distance between the electrodes.The THR, PNS100JT-52-5R1 is ideal for applications which require an adjustable resistance value. It can be used in power supplies, lighting systems, switches, and for low-voltage circuit protection. It can also be used in telecommunication, automotive and industrial applications. The THR is very reliable and can handle large loads without being damaged or affected.In addition to its applications, the THR, PNS100JT-52-5R1 has a number of advantages. It is compact in size and can be easily integrated into a circuit. It is resistant to corrosion and extreme temperatures, which makes it suitable for use in a wide range of environments. It also has a very low self-inductance, making it suitable for high frequency applications. The THR, PNS100JT-52-5R1 has a working principle which consists of a dielectric-coated ceramic layer. This layer is then sintered with five copper electrodes, forming a resistor network. When a voltage is applied, the resistance of the THR increases or decreases, depending on the applied voltage. The increase or decrease in resistance is directly proportional to the voltage applied to the THR.

The specific data is subject to PDF, and the above content is for reference