POE60S-4AF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power over Ethernet (PoE) is a technology that has seen rapid growth in the past few years. This technology allows communication devices, such as IP phones, VoIP telephones, and wireless access points, to take power from the same twisted pair cable as is used for data. POE60S-4AF is one of the many PoE designs offered by companies today. It is designed to provide power for up to four PoE devices from a single twisted pair cable.

The first step in understanding how POE60S-4AF works is understanding the terminologies used. A "Power Sender Unit" (PSU) takes an existing data stream, extracts the data, and then sends power on unused wires. The "Power Receiver Unit" (PRU) takes the power from the incoming stream and converts it into power that can be used by the device. The PSU and PRU must be specifically designed to work together and the communication must be two-way for the system to work efficiently.

The POE60S-4AF was designed to be a cost effective solution for providing power to multiple PoE devices. It takes input power from an AC source or a DC source and then sends this power to multiple points on a Cat5/6 cable. The POE60S-4AF works with the IEEE 802.3af standard and can provide up to 48V DC to each point. The POE60S-4AF has a PoE port for each of the four devices and each port provides up to 15W of power. The PSU also has an integrated over-voltage protection system to protect connected devices.

The PRUs on the POE60S-4AF are designed to take the power from the data stream and convert it into power that can be used by the device connected to it. The POE60S-4AF PRUs use a power supply which is integrated with the PRU, eliminating the need for a separate power source. The POE60S-4AF also provides protection against over-volt aged devices, short circuits, and power surges. The POE60S-4AF also has an integrated interference protection system which helps reduce EMI.

The POE60S-4AF is designed for use in both light and heavy duty applications, such as in buildings, hospitals, and industrial environments. It is also suitable for use in offices and hospitality establishments. The POE60S-4AF is easy to install and provides a cost effective solution for providing power to devices located long distances away, such as in warehouses and remote locations. The system is also scalable, meaning it can be adjusted or upgraded as needed.

To put it simply, the POE60S-4AF is a system for providing power to up to four PoE devices from a single twisted pair cable. The PSU takes input power from an AC or DC source and sends it to multiple points on the Cat5/6 cable. The PRUs then take the power from the data stream and converts it into usable power for the device. The POE60S-4AF is well suited for both light and heavy duty applications. It is easy to install and provides a cost effective solution for powering devices located long distances away.

The specific data is subject to PDF, and the above content is for reference