POE75U-1UP(PD)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power over Ethernet, referred to as PoE, is a networking technology that enables electrical power to be supplied through Ethernet cables. It works by transmitting power over the Ethernet cable, rather than through a traditional power adapter. By streamlining the power and data transfer processes, PoE is now a popular choice for networking applications. The POE75U-1UP(PD) is a switch model that supports Power over Ethernet.

The POE75U-1UP(PD) is a high-performance, cost-efficient Power over Ethernet solution. It is designed to meet the Power over Ethernet Plus (PoE+or802.3at Type 2) requirements. It provides up to 30 Watts of power to two dedicated PoE ports, allowing it to power high power devices such as IP cameras, VOIP phones and wireless access points. The POE75U-1UP(PD) is also a full-featured switch, offering up to four gigabit ports and an additional two 10/100Base-T port.

The POE75U-1UP(PD) is designed for a wide variety of applications. It can be used to extend PoE connections to locations that would normally require an extra power cable, such as a wireless access point. It can also be used to power VoIP phones, IP cameras, and other high power PoE devices, over extended distances. In addition, the switch can be used to provide redundant power to multiple PoE devices.

The POE75U-1UP(PD) supports standard PoE features such as short circuit protection, power sourcing equipment (PSE) detection, and overload protection. It also supports advanced features such as power management and priority control. In addition, the switch provides enhanced error detection and isolation capabilities, allowing for faster fault detection and resolution.

In terms of working principle, the POE75U-1UP(PD) is based on the concept of supplying power to devices through the Ethernet cable. This is done by using the existing Ethernet cable infrastructure, rather than requiring additional power adapters and wiring. A special PoE adapter, called a midspan, is installed in between the Ethernet cable and the device, and provides the power to the device through the cable. At each end of the Ethernet cable, a PoE injector is used to convert the power in the Ethernet cable into usable electricity.

Once the power is converted into usable electricity, it is then routed to the device. The PoE adapter on each end of the cable controls how much power is delivered to the device. This power is typically delivered as direct current (DC). Depending on the specification of the POE75U-1UP(PD), the power can be supplied at distances of up to 100 meters.

In conclusion, the POE75U-1UP(PD) is a high-performance Power over Ethernet solution which is designed for a variety of applications. The switch harnesses existing Ethernet cables to supply power to connected devices, removing the need for extra wiring or power adapters. It also features advanced features such as power management and priority control, as well as enhanced error detection and isolation capabilities. These features make it the perfect solution for applications where Ethernet and power must be supplied over extended distances.

The specific data is subject to PDF, and the above content is for reference