PP11-1-3.00A-20605-2-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are devices used to protect electrical wiring, motors and other electrical circuits from short-circuiting or damage caused by excess current. The PP11-1-3.00A-20605-2-V circuit breaker is a device used in medium voltage applications and is a type of product within the medium voltage products category. This product is specifically designed for applications with higher current and voltage than low voltage circuit breakers, and is capable of providing protection and control for larger loads.

The PP11-1-3.00A-20605-2-V circuit breaker is an air-blast circuit breaker, which is designed for use in medium voltage applications up to 15 kV and currents up to 2700 A. It is a single phase breaker, which means that it has only one phase of current. It is designed for both motor and overload protection, as well as for fault protection. The circuit breaker is controlled by a shunt trip, which is a device used to operate the circuit breaker remotely. The shunt trip is operated by a remote switch or relay, and is connected to the breaker\'s control circuit. This allows the breaker to be operated remotely, allowing the user to disconnect a circuit when necessary.

The PP11-1-3.00A-20605-2-V circuit breaker is designed to provide short circuit protection. This is because it is able to detect an abnormally high current in the circuit, and will then disconnect the power supply to the circuit, thus protecting the components in the circuit from being damaged due to the increased current. The circuit breaker also offers overcurrent protection, which allows it to limit the amount of current flowing through the circuit. This can be useful in applications where a large current is expected, but needs to be limited in order to prevent damage to the components.

The PP11-1-3.00A-20605-2-V circuit breaker is designed for both motor and overload protection applications. The circuit breaker can be used in applications such as motor control, heating and ventilation systems, and process control systems. It is also designed for use in applications that require fault protection, as it can detect an under voltage or over voltage condition, as well as a phase loss, or reverse phase condition. This allows the user to safely disconnect a circuit in the event of an under or over voltage, or phase loss condition.

In summary, the PP11-1-3.00A-20605-2-V circuit breaker is a device used in medium voltage applications and is specifically designed for applications with higher current and voltage requirements than low voltage circuit breakers. It provides short circuit protection, overcurrent protection, and fault protection, making it an ideal choice for motor, overload and process control applications.

The specific data is subject to PDF, and the above content is for reference