PPN320JT-73-0R22

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are integral components in almost any electrical circuit. They are used mainly for limiting current, voltage and power dissipation. The most common type of Through Hole Resistor is the PPN320JT-73-0R22. This type of resistor is a dual-in-line package (DIP) resistor and it is available in a wide variety of E-series resistance values from 100R up to 1KΩ.

The PPN320JT-73-0R22 has two main application fields: voltage divider and current limiting. In a voltage divider circuit, the PPN320JT-73-0R22 is used to divide the input voltage into two parts, thus providing an adjustable output voltage. In a current limiting circuit, it acts as a load, limiting the amount of current flowing through the circuit.

The working principle of the PPN320JT-73-0R22 is based on the fact that it is a non-linear device. This means that, when a certain amount of current is applied to it, the voltage across it increases. The voltage across the resistor increases until it reaches a saturation limit, at which point the current flowing through it is the same as the current applied. The saturation limit is determined by the particular resistance value of the resistor.

The PPN320JT-73-0R22 is made up of two layers of metalized contact points, one on each end of the resistor. The inner layer is a conductive material that carries the current while the outer layer is an insulating material. The resistance of the resistance is determined by the electrostatic field between the two layers. The field is created when the two layers are soldered together and it is the force that causes the current to flow through the resistor.

The PPN320JT-73-0R22 is designed to handle up to 100 watts of power. This makes it an ideal choice for high-power circuits. It is also available in various tolerance values allowing it to be used in precision circuits. Furthermore, it has a low thermal coefficient, meaning that it does not change significantly in resistance when subjected to extreme temperatures.

In summary, the PPN320JT-73-0R22 is a through hole resistor and can be used for both voltage divider and current limiting applications. It has an electrostatic field between its two metalized contact points to determine its resistance and it is available in a variety of resistance values and tolerance levels. Furthermore, it is rated for high power application with its low thermal coefficient meaning that it is suitable for use in both industrial and consumer electronics.

The specific data is subject to PDF, and the above content is for reference