PQA30-D24-S24-T

Voltage - Output 4:	--
Approvals:	CE
Size / Dimension:	2.99" L x 1.24" W x 0.84" H (76.0mm x 31.5mm x 21.2mm)
Mounting Type:	Chassis Mount
Operating Temperature:	-40°C ~ 85°C (With Derating)
Efficiency:	87%
Applications:	ITE (Commercial)
Voltage - Isolation:	1.5kV
Power (Watts):	30W
Current - Output (Max):	1.25A
Series:	PQA30-T
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	24V
Number of Outputs:	1
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Type:	Enclosed
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com



DC DC Converters

DC DC converters are electric circuits that enable the transfer of electrical energy from a direct current (DC) input source to a DC output load. The input and output voltages and currents of the converter are usually different. As such, the converter acts like an interface between the two sources of power and can be used to adjust the voltage or current differential as needed. DC DC converters are commonly used in industrial and commercial applications to transfer power from one device or system to another.The PQA30-D24-S24-T is a type of DC DC converter and is widely used in many industrial and commercial applications. This particular type of converter is based on the PWM (Pulse Width Modulation) topology and is engineered to provide high-efficiency, reliable step-down and step-up voltage conversion for both single and multiple outputs. This DC DC converter can handle a wide range of input voltages, from 18 to 36V, and provides a regulated output of 12, 24 and 48V. The PQA30-D24-S24-T has a very low noise figure and is thermally protected to ensure reliable operation in a wide range of operating temperatures.The working principle of the PQA30-D24-S24-T DC DC converter is simple. It consists of two primary components – a PWM control circuit and an LC-based filter. The PWM control circuit is responsible for dividing the input voltage into a number of pulses by using a silicon controlled rectifier (SCR). The frequency of the pulses is adjusted according to the input voltage and load requirements, and is typically adjustable between 100kHz and 1MHz. This results in an output voltage that is proportional to the input voltage and the number of pulses.The output voltage is further conditioned and regulated by the LC filter, which is constructed using an inductor and a capacitor. The inductor stores energy from the pulses created by the PWM control circuit and releases it gradually to the output, while the capacitor acts as a buffer, smoothing the output voltage in order to obtain a steady DC output. The combination of these two components ensures that the output voltage is filtered and regulated in order to provide an efficient and reliable voltage conversion.The PQA30-D24-S24-T DC DC converter is widely used in a range of industries, from telecommunications and automotive to consumer applications. It is a highly efficient and cost-effective solution for applications where reliable power conversion and high power density are required. It is also widely used in high risk applications such as military, aerospace and medical devices, as it is designed to meet the strictest safety and EMC standards.In summary, the PQA30-D24-S24-T DC DC converter is a type of electric circuit that enables the transfer of electrical energy from a direct current (DC) input source to a DC output load. It is based on the PWM topology and is designed to provide efficient and reliable step-down and step-up voltage conversion for both single and multiple outputs. The working principle of this DC DC converter is based on a PWM control circuit and an LC filter, which ensures it can regulate and filter an input voltage and provide a steady DC output. The PQA30-D24-S24-T is used in a variety of industries and is designed to meet the strictest safety and EMC standards, making it suitable for high risk applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description