PR01000103902JR500 Resistors

Series:	PR01
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	39 kOhms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Metal Film
Features:	Automotive AEC-Q200, Flame Retardant Coating, Safety
Temperature Coefficient:	±250ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsThrough hole resistors are electrical components used in a variety of different circuits, primarily as a way of regulating current. The resistor works by limiting the amount of current that can flow through it. This is important in order to protect the components downstream from any spikes or over-voltage. The PR01000103902JR500 is a specific type of through hole resistor component. This type of through hole resistor features a resistor lead diameter of 5mm, and a maximum operating temperature of up to 125°C. It also has a maximum power dissipation of 2W, and a maximum DC voltage of 200V. This spec sheet highlights the primary features of the PR01000103902JR500, making it easier for the user to assess its suitability for their application. The PR01000103902JR500 through hole resistor is recommended for use in applications such as power supplies, particularly in higher power circuits which require stable voltage. It is also ideal for use in high current capacity applications, and its stability over a wide temperature range makes it suitable for most environments. Additionally, it is suitable for use in low-frequency noise suppression, making it useful for reducing interference from electronic components. The core element of the PR01000103902JR500 is a metal-oxide film resistor. This type of resistor is made of a strip of metal film, which is spray-coated with a special type of insulating material, known as an oxide. By heating and coating the metal with this material, an electrical resistor is created, where the resistance of the metal-oxide film determines the voltage and current flow through the component.The PR01000103902JR500 is also available in a variety of different values, ranging most typically from 1 ohm to 10K ohms, depending on the user’s specific application. This allows the user to fine-tune the resistor to match their specific requirements. Additionally, the component also features a low-noise operation, which is highly beneficial in reducing interference in circuits containing sensitive components.The PR01000103902JR500 through hole resistor is easy to install and requires minimal wiring, making it ideal for use in prototyping and in production in a range of different applications. The component is also simple to adapt to other circuit boards, making it highly versatile and convenient for users.Through hole resistors are vital components in a range of different electrical circuits, but selecting the right one can be a challenge. For this reason, the PR01000103902JR500 is a great choice due to its simple and effective design. Not only does the device provide reliable stability, but it is also well-suited for various environments, and is easy to install in order to minimise time and labour costs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description