PR03000201803JAC00 Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PR03000201803JAC00 component is a type of through hole resistor, a standard electronic part commonly found in circuits, and used for reducing current flow, dividing voltage, and adjusting signal levels. The resistor is one of the most common, basic components in both analog and digital circuits, and comes in a variety of sizes and wattages, all with a same basic structure.

A through hole resistor is a part that can resist current flow and maintain a set voltage. The most common type of through hole resistor is the conductor-coated carbon film, which is usually chosen for its low cost and good thermal and electrical characteristics. This device generally comes in a small cylindrical shape, with a hollow core that has two wire leads extending out of its ends. The resistor body contains a thin layer of carbon film, with two metal electrodes applied to its inner ends. The film is then coated with a protective layer of conductive material, such as tin and lead, which helps isolate the conductive elements.

Due to its low cost and good characteristics, the PR03000201803JAC00 through hole resistor is commonly used in many electrical circuits. In digital circuits, this device is used to change the levels of signals, primarily by reducing current flow. Similarly, in analog circuits, it can be used to reduce current and adjust voltage levels. It can also be used in rectifiers, digital control systems, amplifiers, audio systems, and many other devices and systems. In addition, these components are commonly used in series with other resistors to increase the total resistance in circuits.

The working principle behind the PR03000201803JAC00 through hole resistor is fairly simple. When a voltage is applied to the resistor, the electrons traveling along the wire hit the resistance of the resistor film. This creates an electrical field which creates the resistive force and reduces the current flowing through the component for a given voltage. As the power dissipates, the resistor\'s temperature increases and the resistance of the film becomes weaker, allowing more current to flow through it.

Illustrated below is a simple circuit diagram of a through-hole resistor, where one of the lead wires of the resistor is connected to the positive supply and the other is connected to the negative. In this circuit, the resistor acts as a current limiter, reducing the amount of current that flows through the circuit.

Overall, the PR03000201803JAC00 through hole resistor is a simple, low-cost component, and it provides effective control over current levels in any electronic circuit. Its wide range of voltage ratings and wattages make the resistor suitable for many applications. Therefore, this part is an essential component in many electrical and digital projects.

The specific data is subject to PDF, and the above content is for reference