PS2521L-2-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers, are devices that electrically isolate components connected to them. As part of the broader category of isolators, optoisolators utilize light-emitting components like a light emitting diode (LED) to transfer an electric signal from one circuit to another across a divide. Among these, we will be focusing on the PS2521L-2-A model, a transistor, photovoltaic optoisolator built with an LED light source and phototransistor receiver used in applications that require isolation.

The PS2521L-2-A stands at 6.2 mm long, featuring 2-input transistor photovoltaic output, a 5 V operating power voltage, 1.8 V saturation voltage and has a current gain of 0.65 A/A. At its core, the active component of the PS2521L-2-A is the LED, which functions as the emissive detector or photoconductor. LED’s have the ability to take in information from other circuits, and convert that information into light emitted from the die. This light, when it strikes a photodiode, can cause the diode to become active and perform a specific task.

Connecting to the LED is transformer coupling, which provides signal isolation to protect the input from any spurious signals whilst ensuring no current passes through the optical path. The transformer is also designed to prevent any static charge on the input from creating an electrical path from one electrical part of the optoisolator to the other. The combination allows for the PS2521L-2-A to perform its task efficiently and reliably within industrial environments.

The LED used in the PS2521L-2-A optoisolator emits light at the appropriate wavelength, striking a phototransistor in the receiver head of the device. The head is designed so that it can detect the light from the LED with a minimum amount of distortion, therefore allowing the signals from the two sides to communicate without interference. The photodiode in the receiver end senses the light and passes it through a transistor circuit, converting the signal into an electric current, which is then sent to the output side of the device.

To ensure safety, the PS2521L-2-A is equipped with internal isolation protection. With a VDE approved safety level, this optoisolator is made up of two electrically independent sections, making sure that the input and output are insulated from each other to prevent accidents or damages. This also protects the device from any electrical noise or interference emitting from either side.

With its efficient performance, it is no surprise that the PS2521L-2-A optoisolator finds applications in in factory automation, controllers, power management, and medical equipment. It has the capability of controlling high current loads and isolating electric currents and signals, making it the ideal choice for industrial and medical electronics.

In summary, the PS2521L-2-A optoisolator is a transistor photovoltaic optoisolator with an LED light source and phototransistor receiver. It can be used in factory automation, controllers, power management, and medical equipment due to its internal insulation, safety, and efficiency. With the setup of LED, transformer coupling, and phototransistor, the PS2521L-2-A optoisolator allows for the signals from the two sides to communicate without interference.

The specific data is subject to PDF, and the above content is for reference