PS2561-1-M-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are becoming more and more important in many fields where voltage isolation between two circuits is needed as an extra measure of safety and protection. The PS2561-1-M-A Transistor, Photovoltaic Output Optoisolator belongs to this group of components. This technical document will explain its application field, as well as its operating principle.

PS2561-1-M-A Application Field

The PS2561-1-M-A is mainly used in total isolation of DC or AC signals, power line application, logic signal isolation, information/data transmission, and motor control. Due to its low current requirement and good response to rapid transients, this component is useful in creative problem solving in a stock of linear, digital, and mixed signal applications.

The PS2561-1-M-A is offered in a convenient 6-pin DIP (or Dual-in-Line package). It has the ability to drive up to two IGBTs/MOSFETs, which saves additional cost, space and allows for a much simpler design.

PS2561-1-M-A Working Principle

Optoisolators are based on a sensing device — typically an infrared LED — enclosed within a transparent epoxy resin system, with a photovoltaic cell (light detector) placed behind it. The PS2561-1-M-A offers a precise threshold value of 20mV, which provides reliable operation of the opto-coupler even with the varying load conditions.

When the LED is off, no current is passing through the output stage and the output transistor is completely disabled. Connecting an input signal to the opto-coupler turns the LED on and the output transistor is enabled, allowing an output voltage to be generated. The two circuits remain electrically isolated, but can still communicate through the opto-coupler.

The PS2561-1-M-A optoisolator is capable of switching high digital signal speeds at 25 Mbps, and it has a minimum pulse width of 20 nSec, making it suitable for high-speed applications. It also offers a wide operating temperature range, from -40°C to +110°C, making it a good choice for demanding, harsh environments.

The PS2561-1-M-A optoisolator also offers a wide range of other features, such as a low turn-on and turn-off times, a 50 kHz switching frequency, a 2 A current transfer ratio (CTR), an isolation voltage of up to 3050 Vrms (across open pins), and a 2800 VDC isolation voltage between the input and output pins.

Conclusion

The PS2561-1-M-A optoisolator offers isolation and precision for applications in a variety of fields, from motor control to logic signal isolation to power line application. This device has a low current requirement, good response to rapid transients, and a precise threshold value of 20 mV. It is also capable of switching high digital signal speeds at 25 Mbps, with a minimum pulse width of 20 nSec. It is well suited for use in demanding, harsh environments.

The specific data is subject to PDF, and the above content is for reference