PS2811-1-F3-K-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PS2811-1-F3-K-A optocoupler is a transistor photovoltaic output optoisolator. It isolates the input from the output circuit and can also be used as a voltage regulator for 4.5-30V. It is used to address noise, pulse width, and voltage between two different circuits.

The PS2811-1-F3-K-A optocoupler uses a light-emitting diode (LED) as the input and an integrated circuit containing two NPN transistors as the output. The LED is mounted inside the plastic case and coupled to the base of the first transistor. The output from the first transistor is connected to the base of the second transistor and the emitter of the second transistor is connected to ground. The collector of the second transistor is connected to the positive supply voltage for the output stage.

When power is applied to the input, the LED diode begins to emit light. The light from the LED is then received by the first transistor and sent to the base of the second transistor. When the base of the second transistor is energised, the conduction path of current is established and current flows from the collector to the emitter of the second transistor. The output voltage is then regulated at the collector of the second transistor.

Another use of the PS2811-1-F3-K-A optocoupler is as an electronic noise filter which can suppress the high frequency noise caused by inductive loads such as relays, contactors, and motors. This type of filter is often used in low cost industrial control circuits to reduce the amount of noise from the control circuit. The optocoupler filters out the noise by passing the signal through the LED and preventing it from reaching the control circuit.

The PS2811-1-F3-K-A optocoupler is also used in pulse width modulation (PWM) applications. PWM is used to control the speed of motor drives, industrial applications, and many other applications. The optoisolator can modulate the pulse width and provide a stable output voltage, reducing the chance of device malfunction.

The PS2811-1-F3-K-A optocoupler is a highly efficient device that is used in a wide variety of applications. It is used to regulate voltage and reduce the chances of device malfunctions due to noise, to act as a noise filter, and to provide control for pulse width modulation applications. This type of optoisolator is easy to install and maintain, making it a great choice for various types of industrial applications.

The specific data is subject to PDF, and the above content is for reference