PS2811-4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Opto-isolators are solid-state electronic devices used to isolate signals between two circuits. They provide a high degree of electrical isolation between the input and output contacts, while allowing the transmission of the signal between the two areas.An opto-isolator typically consists of a light-emitting diode (LED) and a photodetector such as a photodiode, a phototransistor, or a CCD. The LED emits light when an electric current passes through it, which is then detected by the photodetector at the other end.

The PS2811-4 is a particular type of opto-isolator which utilizes a phototransistor as the output device. This opto-isolator is commonly used in industrial automation control systems for signal isolation. This can reduce or eliminate ground loops and power surges that may occur when communciation lines share a common ground. It is also used in many electronics circuits for signal switching and isolation.

The PS2811-4 opto-isolator includes an infrared LED and a phototransistor. The LED portion of the opto-isolator, when activated, produces light which is then detected by the phototransistor portion of the device. When the phototransistor receives light, it allows the current to flow through the circuit, activating a switch or relay.

The opto-isolator can be used in a variety of applications including power supply isolation, instrumentation control, medical equipment, and embedded electronics systems. The PS2811-4 opto-isolator has an operating voltage of 2.5 to 30 volts DC and a maximum collector current of 100mA. It has a minimum insulation resistance of >100MΩ and a maximum transmitter luminous intensity of 700mcd.

The working principle of the PS2811-4 opto-isolator is quite simple. When a voltage is applied to the LED portion of the device, it emits light which is then detected by the phototransistor. This activates the switch or relay which allows current to flow through the circuit. The high degree of electrical isolation provided by the device ensures that the voltage on one side of the device does not affect the voltage on the other side.

The PS2811-4 opto-isolator can be used in a variety of applications to provide electrical isolation between two circuits. It is often used in industrial automation systems and other electronics circuits to provide signal switching and isolation, preventing ground loops and power surges. Its simple operating principle makes it an attractive option for many applications which require high levels of electrical isolation.

The specific data is subject to PDF, and the above content is for reference