PS2913-1-F3-K-AX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic devices that can isolate an input signal from the output signal. They are primarily used in the design of signal interfaces between sections of a circuit, or between different circuits. In these applications, an optoisolator provides a path for the signal current to flow while preventing any voltage from developing across it. PS2913-1-F3-K-AX is an optoisolator of the transistor, photovoltaic output type.

The construction of an optoisolator of this type consists of an LED and a phototransistor, separated by some type of barrier. The LED is driven by the input voltage, and emits photons that are detected by the transistor. The result is that the phototransistor is turned on, allowing the current through it in the same manner as it would if it were directly wired to the output voltage. The barrier between the two prevents any direct connection between the input and output.

In a typical application of a transistor, photovoltaic output optoisolator, the interface circuit is responsible for controlling the amount of current flowing through the LED. An example of such a circuit is a voltage regulator, which is used to maintain the LED drive voltage at a constant level. When the transistor is enabled, the output current is allowed to flow, and when it is disabled, it does not.

This type of optoisolator has a number of advantages over other isolation devices. For one, it is highly reliable and efficient, because it is based on light instead of electric fields. This means that there is no risk of electrical interference or spurious signals affecting the signal. Additionally, the device can be used to provide greater isolation between the input and output signals, as there is no direct connection between them.

In addition to being used in isolation applications, optoisolators of this type can also be used in communication and data transmission. By sending light to the phototransistor, it is possible to create digital pulses that can be interpreted by the receiving device. These pulses can then be used to transmit data or information between two different digital systems.

Overall, the PS2913-1-F3-K-AX optoisolator is a reliable, efficient device for isolating electrical signals from each other. Its reliability and efficiency make it suitable for a wide range of applications, and its ability to be used for data transmission makes it even more attractive.

The specific data is subject to PDF, and the above content is for reference