PS60M-0MC1BR100K

Series:	PSxxM
Part Status:	Active
Lead Free Status / RoHS Status:	--
Resistance:	100 kOhms
Power (Watts):	0.2W, 1/5W
Tolerance:	±20%
Adjustment Type:	Top
Fader Type:	Dual
Travel Range:	60mm
Size / Dimension:	Rectangular - 2.953" L x 0.354" W x 0.276" H (75.00mm x 9.00mm x 7.00mm)
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Slide Potentiometers: PS60M-0MC1BR100K Application Field and Working Principle

Slide potentiometers, also known as slide pots and faders, are a type of electronic component used for voltage divider applications. They are commonly used in audio circuits, as part of the circuitry found in mixers, amplifiers, and other sound-related equipment. The PS60M-0MC1BR100K is a specific type of slide potentiometer specifically designed for audio applications. This article will discuss the application field and working principle of the PS60M-0MC1BR100K.The PS60M-0MC1BR100K is a single-gang, linear slide potentiometer. It is a single-pole device that consists of a resistor element, a conductor slide, and a mechanical slide. The resistor element comprises of a pair of resistors permanently attached to the body of the potentiometer. The conductive slide slides across the resistor element, connecting one end to the other. The mechanical slide physically moves the conductive slide across the resistor element. The position of the mechanical slide can be used to vary the amount of resistance across the resistor element.The PS60M-0MC1BR100K is primarily used for audio applications. It is designed to act as a volume control or tone control in an audio system. It is also used for various other purposes, including but not limited to: level control of line levels, level control of speaker systems, level control for synthesizers, and level control of recording levels.The PS60M-0MC1BR100K operates on a linear taper circuit, meaning that the resistance varies linearly as the slide moves up and down. This allows for accurate control and repeatability of the audio level. The PS60M-0MC1BR100K is rated at a maximum of 50mA and is available in 2 different configurations: 100K ohm and 10K ohm. The 10K ohms configuration is primarily used for music applications, while the 100K ohms configuration is used for line level controls in mixing boards, synthesizers, or audio effects processors.The PS60M-0MC1BR100K is designed to be mounted on a flat surface or can be mounted in a recessed panel using the included mounting brackets. The unit has two knobs: one for adjustment of resistance and one for adjustment of the mechanical slide position. The mechanical slide position adjustment knob allows for fine control of the between the resistive elements; this is important for precise level or tone control. The included four-way wired connector allows for easy installation and connection of the potentiometer.Overall, the PS60M-0MC1BR100K is a well-designed, high-quality slide potentiometer that is ideal for audio applications. It is a versatile device that can be used for level control, tone control, or other related applications. Its linear taper circuit provides precise resistance control and repeatability. The included mounting brackets and four-way wired connector make it easy to install and connect. The PS60M-0MC1BR100K is an ideal choice for audio-related projects.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description