PS8501-AX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components which have the ability to electrically isolate two circuits, in order to protect them from each other. The PS8501-AX is a type of optoisolator which utilizes a photocoupler in order to achieve electrical isolation. It features a transistor and photovoltaic output, allowing it to be used in various applications where isolation is important.

The PS8501-AX is a 6-pin device with four terminals. The two most commonly used pins are the collector and emitter. The collector is the input side of the device, and the emitter is the output side. Two other pins, known as the control and reset pins, are used for operational control of the device.

The primary application for the PS8501-AX is for isolation in industrial and medical settings. In industrial settings, the optoisolator can be used to isolate two independent electrical circuits, which may be subject to interference or potential short-circuit conditions. The optoisolator prevents electrical shock hazards by providing a barrier between the two circuits. In medical settings, the optoisolator can be used to isolate monitors and other sensitive equipment from high voltage or high current devices.

The primary working principle behind the PS8501-AX is photocoupling. This process uses a light source, typically an LED for the PS8501-AX, to transfer a signal from one side of the device to the other without any direct electrical connection. The LED emits light which is then received by a photodetector. The photodetector converts the light into an electrical signal, which is then transferred to the output side of the device. The photodetector can also be used to sense the light emitted by the LED and provide feedback to the transmitter circuit to indicate the output level.

The PS8501-AX also has a transistor output, which is normally used to switch an external logic circuit. The transistor output is enabled when the light emitted by the LED is received by the photodetector. The transistor will then turn on and provide the necessary voltage level to switch an external circuit. The transistor can also be programmed to have different thresholds, such as a current or voltage level, when the signal changes.

The PS8501-AX also has a photovoltaic output, which is a small solar panel or photovoltaic cell. This output can be used to power other components or devices which require a constant source of voltage. The photovoltaic cell is sensitive to light, and will provide a consistent output voltage when it is exposed to light. It can also be programmed to change the output voltage when exposed to different levels of light.

The PS8501-AX is a versatile optoisolator which can be used for a variety of applications where electrical isolation is necessary. It is capable of isolating two circuits using a photocoupler and providing a transistor and photovoltaic output. The device can also be programmed to provide extra features, such as changing the output voltage when exposed to different levels of light. Altogether, the PS8501-AX is a reliable and cost-effective solution for applications which require electrical isolation.

The specific data is subject to PDF, and the above content is for reference