PS9121-V-AX

Data Rate:	15Mbps
Supplier Device Package:	5-SO
Package / Case:	6-SOIC (0.173", 4.40mm Width), 5 Leads
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply:	2.7 V ~ 3.6 V
Current - DC Forward (If) (Max):	30mA
Voltage - Forward (Vf) (Typ):	1.65V
Rise / Fall Time (Typ):	20ns, 5ns
Propagation Delay tpLH / tpHL (Max):	75ns, 75ns
Series:	NEPOC
Current - Output / Channel:	25mA
Output Type:	Open Collector
Input Type:	DC
Common Mode Transient Immunity (Min):	15kV/µs
Voltage - Isolation:	3750Vrms
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output

The PS9121-V-AX is an opto-coupler, an electronic device which isolates input and output circuits using optical techniques. It is an opto-isolator with a logic output, specifically designed to interface with TTL logic. This type of opto-coupler is commonly used in many circuits as a way to protect inputs from dangerous external voltages or isolate part of a circuit from being altered.

What Is an Opto-Coupler?

An opto-coupler, also known as an opto-isolator, is a device that uses light to transfer electrical signals between input and output circuits. Opto-couplers provide a high degree of insulation between the input and output, allowing two completely independent circuits to interact without any direct physical connection. This isolation increases safety and prevents interference between the two sides.

How Does a PS9121-V-AX Opto-Coupler Work?

The PS9121-V-AX opto-coupler consists of a light-emitting diode (LED) mounted on the input side, and a phototransistor on the output side. The LED is driven by an external voltage and produces light when energized. The light is then picked up by the phototransistor, which in turn drives the output circuit. The successful operation of the PS9121-V-AX relies on the LED intensity being greater than the phototransistor dark current. Therefore, if the LED does not draw enough current, or if the LED is too far away from the phototransistor, the device may not operate as expected. The PS9121-V-AX is designed to interface directly with TTL logic, which has become the predominant logic standard for most digital circuits. To achieve this level of compatibility, the opto-coupler is designed to convert a logic-level input signal into a light signal, which is then converted back into a logic-level output signal.

Advantages of the PS9121-V-AX

The PS9121-V-AX opto-coupler provides several key advantages over other opto-isolator devices. One advantage is its low power consumption, compared to higher-powered couplers. This low power requirement is beneficial to battery operated systems, and is also beneficial when using logic levels other than TTL. Additionally, the PS9121-V-AX opto-coupler features a wide range of gain configurations, due to its variety of available light sources. This means that the opto-coupler can be tailored to fit a wide range of application needs, allowing engineers to easily optimize the device for a specific application.

Applications of the PS9121-V-AX

The PS9121-V-AX opto-coupler is commonly used in a wide range of applications, such as industrial automation, consumer electronics, automotive systems, and communications systems. In industrial automation, PS9121-V-AX couplers are often used to provide isolation between the input and output circuits in order to protect against dangerous voltages or other hazardous conditions. In consumer electronics, the PS9121-V-AX is used to isolate digital devices, such as LED displays, from the power supply. This allows the devices to be more accurately and safely driven while reducing power consumption and improving reliability. In automotive systems, the PS9121-V-AX coupler is commonly used to enable the control of actuators and lights based on a digital signal. This type of device is used in a wide range of automotive applications, from controlling brake lights to temperature sensors and doorlocks. In communications systems, the PS9121-V-AX is used to isolate digital signals from the analog signals in order to reduce interference caused by electromagnetic signals and improve the signal quality of the transmission. This type of opto-coupler is used in both wired and wireless communication systems, as well as for computer networking.

Conclusion

The PS9121-V-AX is a versatile opto-coupler designed to interface directly with TTL logic. This device provides excellent insulation and is capable of operating at low supply currents, making it an ideal choice for a wide range of applications. From industrial automation to consumer electronics and communications systems, the PS9121-V-AX opto-coupler is a highly reliable and efficient solution for isolating digital and analog signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description