Allicdata Part #: | PS9814-1CT-ND |
Manufacturer Part#: |
PS9814-1-F3-A |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | CEL |
Short Description: | OPTOISO 2.5KV OPEN COLL 8SSOP |
More Detail: | Logic Output Optoisolator 10Mbps Open Collector 25... |
DataSheet: | PS9814-1-F3-A Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Cut Tape (CT) |
Part Status: | Obsolete |
Number of Channels: | 1 |
Inputs - Side 1/Side 2: | 1/0 |
Voltage - Isolation: | 2500Vrms |
Common Mode Transient Immunity (Min): | 10kV/µs |
Input Type: | DC |
Output Type: | Open Collector |
Current - Output / Channel: | 25mA |
Data Rate: | 10Mbps |
Propagation Delay tpLH / tpHL (Max): | 75ns, 75ns |
Rise / Fall Time (Typ): | 20ns, 10ns |
Voltage - Forward (Vf) (Typ): | 1.65V |
Current - DC Forward (If) (Max): | 20mA |
Voltage - Supply: | 4.5 V ~ 5.5 V |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Surface Mount |
Package / Case: | 8-SOIC (0.154", 3.90mm Width) |
Supplier Device Package: | 8-SSOP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The optoisolator devices provide electrical isolation between two electronic systems, and this type of product is particularly effective when interfacing systems with non-similar operating voltages. The specific type of product discussed in this article is the PS9814-1-F3-A from Vishay Semiconductor, which belongs to the opto-isolator family, classified as Logic Output. This type of component is used to isolate low level logic signals, such as the 0-5V interfacing signals used by electronics used in robotics.
The PS9814-1-F3-A optoisolator featured in this article features a dual-channel opto-isolator and a logic-level output, allowing it to isolate low-level signals while maintaining signal integrity. This opto-isolator includes a phototransistor, which is used to act as an interface between the electronic systems. The main function of the opto-isolator is to provide electrical isolation between the two systems, preventing any potential interference or interference from propagating from one system to the other. The device is also designed to provide a clean and reliable level conversion from a 0-5V logic input signal to a logic output.
The PS9814-1-F3-A optoisolator has a number of applications in which it can be used. One of its most common uses is in robotics, where it can be used to isolate and isolate single-board computers from servos and other complex systems. By providing electrical isolation, this opto-isolator can prevent interference from propagating to the servos, ensuring a reliable and accurate motion. In addition, this type of isolator is also used in analog-to-digital conversion, as well as providing a reliable signal connection between separate systems.
The PS9814-1-F3-A optoisolator also has a number of features that ensure its operation is reliable and accurate. The device features a wide common-mode transient immunity of more than 30V, which ensures that it remains immune to noise and transient signals, as well as interference signals. In addition, the device has a high isolation voltage of up to three-and-a-half kilovolts, giving it excellent performance when working in high-voltage isolation environments. Finally, the device also features an ESD protective circuit, which ensures it can withstand electrostatic discharges.
The PS9814-1-F3-A optoisolator operates by using a phototransistor that acts as a bridge between the two systems. The phototransistor is responsible for isolating the systems by converting the electrical potential between the two systems to a light signal. This type of optoisolator works by converting a 0-5V input logic signal to a logic output. This type of opto-isolator can also be used to provide a level conversion between two different voltage signals, by simply switching the voltage of the input signal. In addition to these features, the device can also be used to detect and measure capacitive loads, allowing it to be used in capacitance-conversion applications.
In conclusion, the PS9814-1-F3-A optoisolator from Vishay Semiconductors is an effective and reliable optoisolator that is designed to provide electrical isolation between two systems. This type of device is often used in robotics, analog-to-digital conversion, and signal level conversion applications. The device also features a wide common-mode transient immunity and a high isolation voltage, ensuring that it can effectively isolate two systems while preserving signal integrity. Finally, the device is also equipped with an ESD protective circuit, ensuring that it can withstand electrostatic discharges, as well as external noise and interference signals.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PS9851-1-AX | CEL | 1.5 $ | 1000 | OPTOISO 2.5KV PUSH PULL 8... |
PS9822-2-F3-L-AX | CEL | 1.57 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9822-1-N-AX | CEL | 1.66 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9822-1-L-AX | CEL | 1.66 $ | 1000 | OPTOISO 2.5KV OPEN COLLEC... |
PS9851-2-F3-AX | CEL | -- | 1000 | OPTOISO 2.5KV 2CH PSH PUL... |
PS9851-2-V-F3-AX | CEL | -- | 1000 | OPTOISO 2.5KV 2CH PSH PUL... |
PS9821-2-V-AX | CEL | 2.0 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9822-2-N-AX | CEL | 2.12 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9822-2Y-N-AX | CEL | 2.15 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9851-2-V-AX | CEL | 4.74 $ | 1000 | OPTOISO 2.5KV 2CH PSH PUL... |
PS9814-1-F3-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9814-2-F3-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9817-1-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9817-1-F3-A | CEL | -- | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9817-2-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9817-2-F3-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9821-1-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9821-1-F3-A | CEL | -- | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9821-2-A | CEL | -- | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9821-2-F3-A | CEL | -- | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9814-1-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9814-1-V-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9814-1-V-F3-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9814-1-V-F4-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9814-2-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9814-2-F4-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9814-2-V-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9814-2-V-F3-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9814-2-V-F4-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9821-1-F4-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9821-2-F4-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9821-2-V-A | CEL | 0.0 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9821-1-F4-AX | CEL | 0.85 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9822-1-F3-N-AX | CEL | 0.88 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9851-1-F3-AX | CEL | 1.23 $ | 1000 | OPTOISO 2.5KV PUSH PULL 8... |
PS9817A-1-AX | CEL | 1.24 $ | 1000 | OPTOISO 2.5KV OPEN COLL 8... |
PS9821-2-F4-AX | CEL | 1.34 $ | 1000 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9817A-2-F3-AX | CEL | -- | 4500 | OPTOISO 2.5KV 2CH OPEN CO... |
PS9821-1-AX | CEL | -- | 159 | OPTOISO 2.5KV OPEN COLL 8... |
PS9822-2-L-AX | CEL | 3.54 $ | 155 | OPTOISO 2.5KV 2CH OPEN CO... |
OPTOISO 5.3KV TRI-STATE 8SMDLogic Output...
OPTOISO 5KV PUSH PULL 6SSOLogic Output O...
OPTOISO 2.5KV OPEN COLL 8SSOPLogic Outpu...
OPTOISO 1.5KV OPN COLLECTOR 8DIPLogic Ou...
OPTOISO 3.75KV PUSH PULL 8DIP GWLogic Ou...
OPTOISO 7.5KV OPEN COLL 10DIPLogic Outpu...