PSM500JB-100R

Series:	PSM
Packaging:	Bulk
Part Status:	Active
Resistance:	100 Ohms
Tolerance:	±5%
Power (Watts):	5W
Composition:	Wirewound
Features:	Anti-Arc, Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	--
Operating Temperature:	-55°C ~ 350°C
Package / Case:	Radial
Supplier Device Package:	--
Size / Dimension:	0.984" L x 0.276" W (25.00mm x 7.00mm)
Height - Seated (Max):	0.331" (8.40mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A through hole resistor, also called a through-hole mount resistor, is a type of resistor that is mounted on circuit boards by using metal leads that are inserted through component holes and then soldered to the board\'s pads. It is by far the most common type of resistor used today. A wide range of sizes and shapes are available to meet the needs of almost any application.

One such type is the PSM500JB-100R through hole resistor. It features a cylindrical shape with a 1/4 inch diameter and a metalized film cylindrical body. This type of resistor is designed to be surface mounted, providing a cost-effective alternative to leaded components. It has a resistance range from 0.1 to 10 ohms, with a tolerance of 5%. It also has an operating temperature range of -40 to +125 Celsius, making it a good choice for high temperature environments.

This type of resistor is most commonly used in electronic circuits where a low-resistance value is desired. It is used as a load resistor, voltage divider, current limiter, attenuator, snubber, series resistance, and overvoltage protection. The PSM500JB-100R can also be used to control current and minimize power dissipation in a system.

The PSM500JB-100R is designed to operate under direct current loads, and is not recommended for use in alternating current applications. The maximum power rating of this type of resistor is 4 watts, and its typical lifespan is 10,000 hours at 25° Celsius. It has a maximum voltage rating of 250 volts DC, and a maximum voltage rating of 500 volts AC. The so-called power rating of this type of resistor is actually an indication of how much power can be dissipated by it without being damaged.

The working principle of a PSM500JB-100R resistor is relatively simple. It works by reducing the total current that passes through the resistor by an amount equal to the Ohms of the resistor. In other words, a 1k Ohm resistor will reduce the current by a factor of 1,000. This helps prevent damage to the electronic components in the circuit or system, and also helps prevent energy wastage.The PSM500JB-100R is especially popular in consumer electronics, communication equipment, and automotive applications. It is also widely used in medical devices, industrial instrumentation, and power supply systems. With its relatively low cost, good reliability, and high resistance, it is a great choice for most applications where a through hole resistor is needed.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description