PSP900JB-18R

Series:	PSP
Packaging:	Bulk
Part Status:	Active
Resistance:	18 Ohms
Tolerance:	±5%
Power (Watts):	9W
Composition:	Wirewound
Features:	Anti-Arc, Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	--
Operating Temperature:	-55°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.354" Square x 1.496" L (9.00mm x 38.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Through Hole Resistors are used to control electrical currents in circuits. They are one of the most common electronic components and can be found in many electronic applications. The PSP900JB-18R is an example of a through hole resistor. It is a 9mm length, 9mm width, and 18mm height through hole resistor. It has a resistance rating of 900 ohms, and its maximum power rating is 500mW.

Applications
The PSP900JB-18R is a popular choice for many electronic applications. It can be used as a voltage-limiting resistor in power supplies, as well as in high-frequency circuits. It is commonly used as a load resistor in current limiters, motor control devices, and audio amplifiers. It is also used as a current-shunting resistor in cryogenic applications. Additionally, it can be used to provide isolation between two circuits, or to reduce electromagnetic interference.

Working Principle
The PSP900JB-18R works by limiting the amount of current flow in a circuit. Its resistance rating determines the amount of current that can pass through the resistor. When the amount of current passing through the resistor is higher than its rated value, the voltage drop across the resistor will act as a limit for the current. This is due to the Ohm’s Law: V = IR (voltage equals current multiplied by resistance). By controlling the current in a circuit, the PSP900JB-18R can be used to provide protection to the components of the circuit.

Conclusion
The PSP900JB-18R is a highly versatile through hole resistor. Its 9mm length, 9mm width, and 18mm height make it suitable for a variety of applications. It has a resistance rating of 900 ohms, and a maximum power rating of 500mW. It is used as a voltage-limiting resistor in power supplies, a load resistor in current limiters, motor control devices, and audio amplifiers, a current-shunting resistor in cryogenic applications, and for isolation and electromagnetic interference reduction in circuits. Its working principle is based on Ohm’s Law, and it works by limiting the amount of current in a circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description