PT7C5037G1-2GWF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PT7C5037 gate array logic is a single chip high speed, dual port static random access memory (SRAM) without a built-in process control unit. It is designed to serve in a wide variety of applications, including but not limited to computer and electronic device timers, shift registers, real-time clocks, data registers, and memory buses. PT7C5037 is versatile and is used in low-power, high-reliability systems.

The PT7C5037G1-2GWF is a variant of the PT7C5037. It is an 8-bit dual port static RAM capable of operating at speeds up to 4MHz. The G1-2GWF contains two independent RAMs, each with a bank of 128-byte storage arranged in either a 1K static RAM with control logic or a 2K static RAM with control logic.

The G1-2GWF logic’s main application field is mobile and embedded applications, such as mobile phones, GPS systems and automobile electronics. The G1-2GWF is capable of providing data storage for both I/O and memory-mapped operations, and its low operating power allows it to be suitable for use in battery operated systems.

The G1-2GWF logic’s working principle is based on static memory cell technology. It uses single transistor static RAM cells instead of more complex dynamic RAM cells and provides higher speeds with up to 9-bit memory operations and access. The logic also features an 8-bit multiple write strobe, a single 8-bit data strobe and an individual 8-bit read strobe.

The G1-2GWF logic also has a wide range of internal test signals that allow for fast and efficient testing and analysis. Internal test signals include preset, set, clear, and write enable. The logic also has built-in error detection and correction logic that can detect and correct any errors due to soft errors from the memory cell itself.

The G1-2GWF logic has four logic interfaces: DB#, DS#, SDA, and SCL. DB# is the data bus, DS# is the data strobe signal, SDA is the Serial Data port and SCL is the Serial Clock signal. The DB#, DS# and SDA signals are used for data transfer between the logic and system memory and peripherals. In addition, the G1-2GWF logic also has a variety of control signals, like reset, enable, and command control signals.

The G1-2GWF logic has a wide variety of applications, such as but not limited to digital signal processing, automotive, wireless base-stations, GPS, digital audio, and radio frequency detectors. It can be used in a variety of embedded device applications, such as automotive, consumer, industrial, and networking devices.

In conclusion, the PT7C5037G1-2GWF is a single chip, high speed dual port static RAM logic, capable of operating at speeds up to 4MHz. It is used in mobile and embedded applications, such as mobile phones, GPS systems and automobile electronics. Additionally, it has a variety of internal test signals and error detection and correction functionalities, as well as four logic interfaces and a wide range of control signals for data transfer. Its application fields are diverse, ranging from digital signal processing to consumer and industrial devices.

The specific data is subject to PDF, and the above content is for reference