PV32P100A02B00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers are small electronic components that are used to adjust the resistance between two points in a circuit. The PV32P100A02B00 is a type of trimmer potentiometer. This article provides an overview of the application field and working principle of the PV32P100A02B00 trimmer potentiometer.

The PV32P100A02B00 trimmer potentiometer is used primarily in industrial applications for the adjustment of current and resistance. It is typically used for low-frequency signals, such as those encountered in consumer electronics. The PV32P100A02B00 is a through-hole-mounted device, meaning it requires a hole to be drilled into the PCB in order to be used. Its dimensions are 7mm x 18mm x 8mm, with an 8-pin configurations.

The PV32P100A02B00 trimmer potentiometer is basically a variable resistor. It consists of three terminals: two connection terminals, referred to as ends, and one wiper terminal, referred to as the wiper. The wiper is at the center of the resistor and is connected to a cylindrical rotating element, often referred to as the dial. The two ends of the trimmer are connected to the circuit and the wiper is connected to the signal source. The resistance between the two ends varies depending on the position of the dial.

The working principle of the PV32P100A02B00 trimmer potentiometer is based on the varying resistance between the two ends of the resistor. As the dial is turned, the wiper moves across the resistor. Since the resistance across the resistor is a function of the length, turning the dial will cause the resistance to vary. This is known as the \'taper effect\'. A linear taper means that the resistance will increase linearly as the dial is turned. The PV32P100A02B00 trimmer potentiometer features a linear taper, meaning it can be used to control the current, voltage, or resistance in an electronic circuit.

The PV32P100A02B00 trimmer potentiometer can also be used to control the frequency of an oscillator circuit. By adjusting the resistance of the trimmer, the frequency of the oscillator circuit will be changed. This is useful in applications such as radio frequency synthesizers, where accurate control of the frequency is necessary. The PV32P100A02B00 can also be used in filter circuits, audio equalizers, and audio mixers.

The PV32P100A02B00 trimmer potentiometer is a versatile electronic component that is useful in a variety of applications. It can be used to adjust the current, voltage, and resistance in a circuit, as well as to adjust the frequency of an oscillator. The PV32P100A02B00 is a through-hole-mounted device, meaning it requires a hole to be drilled into the PCB in order to be used. It is also a linear taper device, meaning that the resistance will increase linearly as the dial is turned.

The specific data is subject to PDF, and the above content is for reference