PVC6E202A01B00

Series:	PVC6
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Obsolete
Moisture Sensitivity Level (MSL):	--
Resistance:	2 kOhms
Power (Watts):	0.5W, 1/2W
Tolerance:	±10%
Temperature Coefficient:	±100ppm/°C
Number of Turns:	1
Adjustment Type:	Side Adjustment
Resistive Material:	Ceramic
Mounting Type:	Through Hole
Termination Style:	PC Pins
Size / Dimension:	Rectangular - 0.315" x 0.272" Face x 0.315" H (8.00mm x 6.90mm x 8.00mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers

Trimmer Potentiometers are variable resistant electronic components used to adjust the resistance in a circuit. They are usually used for settings that are not changed often, such as static gain control in amplifiers, channel balance adjustment in receivers, toning of radio receivers or adjust offset and scaling for transducers.The PVC6E202A01B00 Trimmer Potentiometer (p-trim) is a single-turn variable-resistance component used to adjust the resistance in a circuit. The p-trim measures 0.15 x 0.10 inch (3.8 x 2.54 mm). The p-trim has a resistive element and two test points to measure the resistance. It is designed with a single-turn shaft and a low nominal resistance for higher circuit resolution.The PVC6E202A01B00 p-trim is suitable for various applications, such as gain control in receivers, preamplifiers, tone control in audio systems, and radio communication systems.

Application Fields

The PVC6E202A01B00 p-trim is suitable for loads of 8 mA, 1- 8 Volts, and offers a nominal resistance of 0.5 ohm. It finds applications in audio bass and treble controls of up to 10 dB boost/cut, pre-amplifiers (tone and gain control), AGC control, signal attenuator circuits, bias control of RF amplifiers, IF filters, and many other applications requiring fine adjustment. It is also used for motor speed and current control.

Working Principle

When the shaft of a p-trim is rotated, the movable contact within the unit moves along a resistor track and causes the resistance value to change. This change in resistance generates a voltage change in the circuit according to Ohm’s Law.The PVC6E202A01B00 p-trim uses a resistor element made up of a ceramic track with a conductive path made of silver palladium (AgPd) material, and a sliding contact that is moved along the ceramic track when the shaft is rotated. The resistor track is divided into four parallel sections, each having a nominal resistance of 0.5 ohms with a 10 dB change in resistance across each section. The resistance variation is thus smoothly linearly changed when the shaft is rotated, and can be measured at two test pins located near the resistor track.

Conclusion

The PVC6E202A01B00 p-trim is a single-turn trimmer potentiometer with a low nominal resistance for fine circuit resolution. It can be used for various applications, such as gain control in receivers and pre-amplifiers, tone control in audio systems, radio communication systems, motor speed and current control, and many more. The p-trim uses a resistor element made up of a ceramic track with a conductive path made of silver palladium material, and a sliding contact that is moved along the ceramic track when the shaft is rotated. This results in a linear change in resistance that can be measured at two test pins located near the resistor track.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description