Allicdata Part #: | PVQ-EUSDC50BU-ND |
Manufacturer Part#: |
PVQ-EUSDC50BU |
Price: | $ 70.22 |
Product Category: | Uncategorized |
Manufacturer: | Panduit Corp |
Short Description: | PVIQ ENHANCED INTERCONNECT CAT6A |
More Detail: | N/A |
DataSheet: | PVQ-EUSDC50BU Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 63.84420 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The PVQ-EUSDC50BU is an integrated A/D and D/A converter commonly found in numerous industrial and commercial applications. It is usually mounted on a PCB board and is capable of process data up to 50 bits deep.
This device is commonly used in a wide variety of applications, such as biomedical instruments, industrial automation, data acquisition systems, and digital-to-analog converters (DACs). It is also found in audio and video systems, communications, Inertial Navigation Systems (INSs),and embedded systems as well.
The principal function of the PVQ-EUSDC50BU is to convert digital data into analog signals and vice versa. This device is capable of processing data up to 50 bits deep and can be used for various tasks such as sample rate conversion and digital signal processing.
The PVQ-EUSDC50BU is a pulse-width modulation (PWM) digital-to-analog converter (DAC). It works by using the pulse of the input signal to determine the amount of time the PWM output signal is used, thus providing a sampling rate that is proportional to the rate of the input signal.
The device also uses a Look Up Table (LUT) to convert the incoming digital signal into a pulse width modulated output. The output from the LUT is then sent to the digital-to-analog converter, which produces the analog equivalent of the input signal.
The PVQ-EUSDC50BU also contains a programmable gain stage that allows users to configure the amplitude of the output. There are two modes of operation for the gain stage: the “boost” mode and the “null” mode. The boost mode is used when the incoming signal is too small to produce a usable output. The null mode is used when there is too much noise in the incoming signal to be processed properly.
The PVQ-EUSDC50BU also contains a low-noise wide-band pre-amplifier (WBPA). This component allows the device to amplify the amplitude of the incoming analog signal. This allows the device to accurately process digital signals that may otherwise be too weak to be effectively processed.
Due to its versatility and range of features, the PVQ-EUSDC50BU can be used in a variety of applications. Its high sampling rate, wide dynamic range, low noise, and wide temperature range make it the ideal solution for many industrial, commercial, and medical applications.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE