PWR4412-2SCR0500J

Series:	PWR4412-2S
Packaging:	Bulk
Part Status:	Active
Resistance:	50 mOhms
Tolerance:	±5%
Power (Watts):	3W
Composition:	Metal Element
Features:	Current Sense, Moisture Resistant, Pulse Withstanding
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	-55°C ~ 270°C
Package / Case:	Radial
Supplier Device Package:	Radial Lead
Size / Dimension:	0.600" L x 0.189" W (15.24mm x 4.80mm)
Height - Seated (Max):	1.000" (25.40mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: PWR4412-2SCR0500J Application Field and Working Principle

Through hole resistors are electrical components that are designed to be mounted to a board and have electrical contacts passing through the board and making contact with the conductive layers underneath the board. They are resistant to electrical current, and this helps reduce the amount of unwanted electrical current that can be present in a circuit. These resistors have varying levels of resistance, depending on the construction and design, and can be used in any electric circuit to reduce or control the amount of current flowing through it.The PWR4412-2SCR0500J is a type of through-hole resistor designed with a resistance of up to 500 Ohms. Its primary purpose is to provide a controlled current flow through an electrical circuit, which helps to prevent the circuit from experiencing overload or short-circuiting. It can also be used to help set a specific voltage in the circuit, as the resistance of the resistor will dictate the amount of current that passes through the circuit.The inner workings of the PWR4412-2SCR0500J are essentially the same as those of other through-hole resistors. The main components consist of a metal casing, which contains two metal discs, known as mica plates. These mica plates are separated by a dielectric material, which is designed to prevent electrical current from passing from one plate to the other. The metal casing is then attached to the board, and the mica plates make contact with the conductive layers underneath the board, which runs the current through the resistor and through the circuit.The PWR4412-2SCR0500J is primarily used for controlling current and limiting voltage within various types of electric circuits, such as those found in computers, televisions, and other electronic devices. For example, one of the most common applications for this type of resistor is for limiting the voltage of a 12V DC circuit, such as those found in most consumer electronics. By setting the resistance of the PWR4412-2SCR0500J to 500 Ohms, the circuit can be limited to only 12V. This ensures that the circuit does not experience any sort of overload or short-circuiting due to higher voltage levels.The PWR4412-2SCR0500J is also used in other applications such as reducing and stabilizing the current within an AC circuit. By setting the resistance of the PWR4412-2SCR0500J to a specific level, the resistor can help control the amount of current flowing through the circuit. For example, if the circuit is intended to pass a current of 100 Amps, the resistor can be set to a resistance of 50 Ohms, thereby limiting the current to a maximum of 50 Amps. This helps to protect the circuit from experiencing overload or short-circuiting.Overall, the PWR4412-2SCR0500J is a type of through-hole resistor that can be used for controlling the current and limiting the voltage in various electric circuits as well as protecting them from overloads and short-circuits. It has a resistance of up to 500 Ohms and is primarily used for reducing and stabilizing the current in AC circuits or limiting the voltage in circuits for consumer electronics. With its ability to provide controlled current through a circuit, the PWR4412-2SCR0500J is a valuable tool in the field of electrical engineering.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description