PYB15-Q48-D12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are a type of electrical device used to convert one type of DC voltage into another type. Examples of types of DC-DC converters include step-down, buck, boost, and inverting converters. The PYB15-Q48-D12 is a DC-DC converter designed specifically for telecom applications. This converter is used to boost lower voltage input signals into higher voltage output signals.

The PYB15-Q48-D12 is a 15 Watt, wide input range DC-DC converter of size 2"x2"x0.6" and operates across the input voltage range of 9-18V with nominal output voltage of 48V. It has an efficiency of up to 85%. Depending on the model, the input and output voltage ranges can vary. This converter is designed to provide the best performance at load ranges between 1%-100%.

When it comes to working principle, the PYB15-Q48-D12 operates in a fixed switching frequency, typically between 100-250 KHz. The power converter has an onboard regulator that consists of a pre-set control loop including a voltage reference IC, an error amplifier, current-sensing circuits and an oscillator. In this supply, an ideal diode bridge is used as power control switch. The diode bridge consists of four diodes connected in an anti-parallel form. It is responsible for the overall efficiency of the power converter.

In its basic form, the PYB15-Q48-D12 has two isolated input leads, four output leads (two of which are ground leads), two shielded rectifier–capacitors, and a control loop consisting of a voltage reference IC, an error amplifier, current–sensing circuits and an oscillator. The unit also comes with a single-pin thermal cut-off protection. The converter\'s input protection is achieved through the use of two blocking diodes connected in series.

The main components of the PYB15-Q48-D12 are the control circuit, power switch, output rectifier, output filter, and transformer. The control circuit is responsible for controlling the time the power switch is turned ON/OFF, and also determines the amount of current flowing through the transformer. The power switch consists of two power MOSFETs connected in parallel. The output rectifier is composed of four Schottky Barrier Diodes (SBDs) connected in anti-parallel. The output filter is composed of capacitors and inductors to suppress the high-frequency ripples from the DC output.

The transformer is the key component of the power converter as it provides the voltage transformation from the input to the output. It is composed of two windings, a primary winding and a secondary winding. The transformer has a designed turns ratio determined by the input and output voltage levels. In order to achieve higher efficiency, the transformer is designed with a high-frequency core.

The PYB15-Q48-D12 is used in a variety of telecom applications, including IPTV, VoIP phones, PBX systems, and access control systems. These systems all require a DC to DC conversion of the input voltage signals to a higher voltage output signal. The PYB15-Q48-D12 offers a wide input range and high efficiency, making it an ideal choice for these applications.

The specific data is subject to PDF, and the above content is for reference