PZU8.2DB2,115

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PZU8.2DB2 is a diode array, consisting of two Zener diodes connected in series. This diode array is designed to provide a low cost and simple solution for a variety of applications. It has two terminals, a positive voltage terminal and a negative voltage terminal.

The most common application for the PZU8.2DB2 is as a voltage regulator. This is achieved by connecting the positive terminal to the load, and the negative to the power supply. The array is then able to sense the voltage on the positive terminal and regulate the voltage accordingly. This is done by the Zener diodes, which act as a voltage limiter, preventing the voltage from exceeding a certain value. The array works by shunting excess current away from the load, preventing it from exceeding the specified voltage.

The PZU8.2DB2 can also be used in circuit protection. By connecting the positive terminal to the source, and the negative terminal to the load, the array can limit the current flow to the load in the event of an over-current condition. This is done by sensing the voltage on the positive terminal, and then shunting the extra current to ground. This prevents the power source from being overloaded, while still allowing the load to receive the necessary power.

The PZU8.2DB2 can also be used as a switch, allowing it to control multiple devices simultaneously. This is done by connecting the positive terminal to the line, and the negative terminal to the load. When the current flow increases, the array will sense this and open the switch, allowing a current to flow to the loads and preventing further current from entering the line. When the current decreases, the array will sense this and close the switch, preventing further current from entering the line. The operation of the switch is controlled by the current on the line, meaning the current can be manipulated to control multiple devices at once.

The PZU8.2DB2 can also be used in switches and transistors. By connecting the negative terminal to the ground, and the positive terminal to the voltage source, the array can act as a switch, allowing current to flow in one direction and then blocking it in the other direction. The reverse happens when the voltage is switched, allowing the array to act as a transistor. By connecting the positive terminal to the emitter, the array can act as a switch, allowing the current to pass through the transistor and then blocking it when the voltage is switched, allowing the current to pass through it in another direction.

The PZU8.2DB2 is a versatile and robust diode array, capable of providing low cost, simple solutions for a range of applications. It is easy to install, efficient at regulating voltage, and can provide multiple levels of protection for both sources and loads. It is a valuable tool for those wishing to design circuits with multiple sources, multiple levels of protection and multiple device control.

The specific data is subject to PDF, and the above content is for reference