Q22P1CXXR110E

Panel Indicators, Pilot Lights

The Q22P1CXXR110E is a type of panel indicator, pilot light specifically being used in the industrial and commercial fields. It combines the characteristics of innovative technology, durability, long lifespan and a wide range of working temperatures. It has a universally accepted standard housing and mounting design, and is certified for UL, CSA, VDE/EN/IEC, UL 198 and other safety certifications. The indication includes long-life LEDS and light bulb which offers high visibility in low-light environments, a brighter LED that is easily visible in sunlight and other bright light. It also features an adjustable light angle and a wide range of mounting holes.

The Q22P1CXXR110E uses a combination of electrical and mechanical engineering principles, which is the foundation of its working principle. The Pilot light derives its power from the current supplied in the host system. The amount of current depends on the application, nonetheless it supplies sufficient electricity to run the circuit at the desired intensity of light. Therefore, the light is triggered by the current flowing through the idle circuit instead of the voltage applied to it.

The electrical components, specifically the LED chips, are mounted to the circuit board using stainless steel screws along with the signal lamps. To ensure proper operation, the circuit board is made using an antistatic material called conductive plastic. The LED chip is supplied with a power source that is delivered by two electrical clips, which in turn are connected to a primary switch.

The primary switch is the mechanism controlling the operation of the Q22P1CXXR110E. To switch the light on and off, the actuator is activated. The actuator is a spring-loaded manual control that is connected to the springs inside the switch housing. When manually operated, it pushes the actuator against the contacts that will either allow or block the current from the power source.

Additionally, the switch has an internal counter-control device that helps with the overall design of the switch. It basically closes or opens the circuit, depending on the operation of the primary switch. Consequently, when the primary switch is opened, the internal control device is automatically reset, allowing the current to be stopped and the LED light is powered off.

The other components of the Q22P1CXXR110E are the indicator and lens/panel unit. The indicator panel is responsible for the overall appearance of the switch. It has the same size as the switch housing and also has an independent power source which helps with illuminating the indicator if needed. The lens is designed to subtly direct the light from the LED light towards the user, allowing the light to be seen in low light conditions.

Finally, the construction of the Q22P1CXXR110E is designed to offer many features that are typically not seen in other related products. It incorporates a single-shell construction which improves the heat dissipation and stability of the switch. It has also been tested and certified for UL/CSA and VDE/EN/IEC standards, making it one of the most reliable products on the market. And since it uses a combination of power current and mechanical principles, it is able to run on lower voltages, making it an economical and reliable tool for industrial applications.