Q3063

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are essential components used for a range of electrical circuit applications to carry out switching operations. They provide electrical isolation between two portions of the same circuit, which helps to protect the equipment and to keep control signals separated. The Q3063 is a range of optoisolators specifically designed for triac and SCR output applications. In this article, we shall look at the application field and working principle for the Q3063.

The Q3063 series of optoisolators is designed to be used with triac and SCR output applications. These optoisolators offer excellent electrical noise immunity and high power-to-channels ratios, making them an ideal choice for all types of switching operations. They are used in equipment such as consumer electronics, automobile, industrial, lighting, and other applications that require good electrical isolation between their two portions.

The Q3063 optoisolators come in both single and dual channel configurations, with each channel being capable of handling up to 30 Amps of current. They have an LED on each side of the isolator, and the LED\'s emit light when current flows through them. This light is then detected by the light-sensitive detector on the other side of the isolator, which produces and output signal that is used to control the triac or SCR.

The working principle of the Q3063 is quite simple. When an electric current is passed through the LED, it emits a light. This light is then detected by the light-sensitive detector on the other end of the optoisolator, which produces an output signal in response. This output signal is then used to control the triac or SCR, depending on the type of output application.

For triac output applications, the output signal will turn on the triac whenever the LED is powered. When the current passes through the triac, it will produce an output voltage. This voltage can then be used to control the device that is connected to the triac.

For SCR output applications, a constant current is passed through the LED when the SCR is in the off state. When the LED senses this current, it will produce an output voltage, which is then used to drive the SCR into the on state. This will then result in an output voltage that can be used to control the device that is connected to the SCR.

The Q3063 is an example of an optoisolator that is specifically designed for triac and SCR output applications. It offers excellent electrical noise immunity and can handle up to 30 Amps of current in a single or dual channel configuration. It is an ideal choice for all types of switching operations and applications that require good electrical isolation between two portions.

The specific data is subject to PDF, and the above content is for reference